Acid-base extraction

Acids and bases
pH Reaction Titration Extraction Dissociation constant (acid) Acid strength Acidity function Buffer solutions Proton affinity Self-ionization of water Amphoterism
Acid types
Brønsted Lewis Mineral Organic Strong Superacids Weak Monobasic acid Dibasic acid Tribasic acid
Base types
Brønsted Lewis Organic Strong Superbases Non-nucleophilic Weak

Acid-base extraction is a procedure using sequential liquid–liquid extractions to purify acids and bases from mixtures based on their chemical properties.^[1]

Acid-base extraction is routinely performed during the work-up after chemical syntheses and for the isolation of compounds and natural products like alkaloids from crude extracts. The product is largely free of neutral and acidic or basic impurities. It is not possible to separate chemically similar acids or bases using this simple method.

Theory

Further information: Acid-base reaction

Overview of an acid-base extraction

The fundamental theory behind this technique is that salts, which are ionic, tend to be water-soluble while neutral molecules tend not to be.

The addition of an acid to a mixture of an organic base and acid will result in the acid remaining uncharged, while the base will be protonated to form a salt. If the organic acid, such as a carboxylic acid, is sufficiently strong, its self-ionization can be suppressed by the added acid.

Conversely, the addition of a base to a mixture of an organic acid and base will result in the base remaining uncharged, while the acid is deprotonated to give the corresponding salt. Once again, the self-ionization of a strong base is suppressed by the added base.

The acid-base extraction procedure can also be used to separate very weak acids from stronger acids and very weak bases from stronger bases, as long as the difference of their pK_a (or pK_b) constants is large enough. For example:

Very weak acids with phenolic OH groups like phenol, 2-naphthol, or 4-hydroxyindole (pK_a around 10) from stronger acids like benzoic acid or sorbic acid (pK_a around 4–5)
Very weak bases like caffeine or 4-nitroaniline (pK_b around 13–14) from stronger bases like mescaline or dimethyltryptamine (pK_b around 3–4)

Usually the pH is adjusted to a value roughly between the pK_a (or pK_b) constants of the compounds to be separated. Weak acids like citric acid, phosphoric acid, or diluted sulfuric acid are used for moderately acidic pH values, and hydrochloric acid or more concentrated sulfuric acid is used for strongly acidic pH values. Similarly, weak bases like ammonia or sodium bicarbonate (NaHCO₃) are used for moderately basic pH values while stronger bases like potassium carbonate (K₂CO₃) or sodium hydroxide (NaOH) are used for strongly alkaline conditions.

Technique

Usually, the mixture is dissolved in a suitable solvent such as dichloromethane or diethyl ether (ether), and poured into a separating funnel. An aqueous solution of the acid or base is added, and the pH of the aqueous phase is adjusted to bring the compound of interest into its required form. After shaking and allowing for phase separation, the phase containing the compound of interest is collected. The procedure is then repeated with this phase at the opposite pH range. The order of the step is not important and the process can be repeated to increase the separation. However, it is often convenient to have the compound dissolved in the organic phase after the last step, so that the evaporation of the solvent yields the product.

Limitations

The procedure works only for acids and bases with a large difference in solubility between their charged and their uncharged form. The procedure does not work for:

Zwitterions with acidic and basic functional groups in the same molecule, e.g. glycine which tend to be water-soluble at most pH.
Very lipophilic amines that do not easily dissolve in the aqueous phase in their charged form, e.g. triphenylamine and trihexylamine.
Very lipophilic acids that do not easily dissolve in the aqueous phase in their charged form, e.g. fatty acids.
Lower amines like ammonia, methylamine, or triethanolamine which are miscible or significantly soluble in water at most pH.
Hydrophilic acids like acetic acid, citric acid, and most inorganic acids like sulfuric acid or phosphoric acid.

Alternatives

Alternatives to acid-base extraction including:

filtering the mixture through a plug of silica gel or alumina — charged salts tend to remain strongly adsorbed to the silica gel or alumina
ion exchange chromatography can separate acids, bases, or mixtures of strong and weak acids and bases by their varying affinities to the column medium at different pH.

References

↑ Laurence M. Harwood, Christopher J. Moody (13 June 1989). Experimental organic chemistry: Principles and Practice (Illustrated ed.). WileyBlackwell. pp. 118–22. ISBN 978-0-632-02017-1.

External links

Acid base extraction

Separation processes

Processes	Absorption Acid-base extraction Adsorption Chromatography Cross-flow filtration Crystallization Cyclonic separation Dialysis (biochemistry) Dissolved air flotation Distillation Drying Electrochromatography Electrofiltration Filtration Flocculation Froth flotation Gravity separation Leaching Liquid–liquid extraction Electroextraction Microfiltration Osmosis Precipitation (chemistry) Recrystallization Reverse osmosis Sedimentation Solid phase extraction Sublimation Ultrafiltration

Devices	API oil-water separator Belt filter Centrifuge Depth filter Electrostatic precipitator Evaporator Filter press Fractionating column Leachate Mixer-settler Protein skimmer Rotary vacuum-drum filter Scrubber Spinning cone Still Sublimation apparatus Vacuum ceramic filter

Multiphase systems	Aqueous two-phase system Azeotrope Eutectic

Concepts	Unit operation

This article is issued from Wikipedia - version of the 2/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.