Advanced Data Communication Control Procedures

In telecommunication, Advanced Data Communication Control Procedures (or Protocol) (ADCCP) is a bit-oriented data link layer protocol used to provide point-to-point and point-to-multipoint transmission of data frames that contain error control information. It places data on a network and ensures proper delivery to a destination. ADCCP is based on the IBM's SDLC protocol. The HDLC by ISO and LAPB by ITU/CCITT are based on ADCCP.

ADCCP is an ANSI standard, X3.66, derived from IBM's Synchronous Data Link Control (SDLC) protocol, and is functionally equivalent to the ISO High-Level Data Link Control (HDLC) standard.^[1]

ADCCP has 3 main modes – NRM (Normal Response mode akin to SDLC), ABM (Asynchronous Balanced mode - akin to HDLC) and ARM (Asynchronous Response mode)

References

↑ Friend et al. 1988, p. 191

Friend, George E.; Fike, John L.; Baker, H. Charles; Bellamy, John C. (1988). Understanding Data Communications (2nd ed.). Indianapolis: Howard W. Sams & Company. ISBN 0-672-27270-9.

This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C".

This article is issued from Wikipedia - version of the 7/25/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Advanced Data Communication Control Procedures

See also

References