Aprilia RX/SX 50

Aprilia RX/SX 50
Manufacturer Aprilia
Parent company Derbi
Production Since 2006
Class Motorcross, Supermoto
Engine 49.76 cc, 11.5:1 CR, liquid-cooled, carburetor-fuelled two-stroke
Power +/- 6.5 hp (4.8 kW) Restricted, 12 hp (8.9 kW) Derestricted
Transmission 6-speed manual
Suspension Ø40 mm hydraulic fork with leading axle; wheel travel 195 mm
Rear: hydraulic monoshock; Non-adjustable; wheel travel 180 mm
Brakes Front: 300 mm stainless steel disc; floating quad-piston caliper
Rear: 180 mm stainless steel disc; twin-piston caliper
Fuel capacity 7 litres
Related Aprilia RX50, Aprilia MX50, Aprilia SX125

The 2006 Aprilia RX/SX 50 is a street/off-road motorcycle widely produced by Aprilia. It is powered by a six-speed, carburetor-fuelled, nikasil-lined and cast iron single-cylinder two-stroke engine manufactured by Derbi/Piaggio.

Styling and concept

The 2006 Aprilia RX/SX 50s are the renovated successors of the Aprilia RX 50 first produced in 1992; the panels and layout are based closely on the bigger displacement Aprilia RXV/SXVs.

Engine

The engine in the Aprilia SX 50 is sourced from Derbi/Piaggio (D50B0/D50B1). This engine is used in the Derbi Senda DRD/X-Race/X-Treme supermotos and crossers, as well as the 2006 onwards Derbi GPR 50 and Aprilia RS 50 road bikes. Engine parts from the crossers and supermotos can be directly swapped with one another; there are some small differences between the road bike and supermoto engine and frame which may require modification to transfer some external engine parts (exhaust, airbox etc.)

Specifications

SX50

50 cc single cylinder, four-petal reed valve case induction and two-stroke injection (automix) carburetor fueled.

Engine displacement – 49.76 cc
Bore/stroke – 39,88×40 mm
Compression ratio – 11.5:1
Clutch – Wet, multiple plate
Starting – Kickstart
Exhaust = Catalytic converter
Rotor Ignition/Generator = 85w/120w
Cooling system – Liquid-cooled
Fuel tank size = 7 litres
Fuel system – Carburetor Dell'Orto PVHA 17.5 mm
Main jet = 102
Needle Jet = A13, notch #2
Idle jet = 30
Transmission
1st = 1st 11/34
2nd = 2nd 15/30
3rd = 3rd 18/27
4th = 4th 20/24
5th = 5th 22/23
6th = 6th 23/22
Primary drive = 21/78
Sprockets
Front = 14 Teeth
Rear = 52 Teeth
Overall Final Drive ratio = 14/52
Spark plug = DENSO W27ESR-U/IW27 NGK BR9ES/BR9EG/BR9EIX
Gap = .6-7 mm
Wheelbase = 55.354 in (1,406 mm)
Length = 79.68 in (2,024 mm)
Width = 80.511 in (2,045 mm)
Height = 32.677 in (830 mm)
Tires = Front: 100/80 - 17 inch; Rear: 130/70 - 17-inch

RX50

50 cc single cylinder, four petal reed valve case induction and two-stroke injection (automix) carburetor fueled

Engine displacement = 49.76 cc
Bore/stroke = 39,88×40 mm
Compression ratio = 11.5:1
Clutch = Wet, multiple plate
Starting = Kickstart
Exhaust = Catalytic converter
Rotor Ignition/Generator = 85w/120w
Cooling System = Liquid-cooled
Fuel Tank Size = 7 litres
Fuel System = Carburetor Dell'Orto PVHA 17.5 mm
Main Jet = 102
Needle Jet = A13, notch #2
Idle Jet = 30
Transmission
1st = 1st 11/34
2nd = 2nd 15/30
3rd = 3rd 18/27
4th = 4th 20/24
5th = 5th 22/23
6th = 6th 23/22
Primary Drive = 21/78
Sprockets
Front = 14 Teeth
Rear = 53 Teeth
Overall Final Drive ratio = 14/53
Spark Plug = DENSO W27ESR-U/IW27 NGK BR9ES/BR9EG/BR9EIX
Gap = .6-7 mm
Wheelbase = 55.354 in (1,406 mm)
Length = 79.68 in (2,024 mm)
Width = 80.511 in (2,045 mm)
Height = 32.677 in (830 mm)
Tires = Front: 90/90 - 21 inch; Rear: 110/80 - 18-inch

Restriction

Restriction varies depending on the country and dealer, person, or company the bike is purchased from. The engine is usually restricted in the following ways:

Carburetor
'Strangle' baffle/plate in Air filter manifold
74 Main jet
Exhaust
Exhaust fume/pressure outlet pipes
Catalytic converter
Sprockets
Front; reduced to 11/53 or 12/53

References

This article is issued from Wikipedia - version of the 10/9/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.