Kawasaki Ha40

Ha40
Preserved Daimler-Benz DB 601.
Type Piston V12 aircraft engine
National origin Japan
Manufacturer Kawasaki
First run 1930s
Major applications Kawasaki Ki-61
Developed from Daimler-Benz DB 601
DB 601A, partially sectioned (right side)
Aichi Atsuta, a license-built DB 601 (left side)

The Kawasaki Ha40, a.k.a. Army Type 2 1,100 hp Liquid Cooled In-line and Ha-60, was a license-built Daimler-Benz DB 601Aa 12-cylinder liquid-cooled inverted-vee aircraft engine. The Imperial Japanese Army Air Service (IJAAS) selected the engine to power its Kawasaki Ki-61 fighter.

Design and development

The Daimler-Benz DB 601Aa was a development of the earlier DB 600, with direct fuel injection replacing the carburetor. Like all DB 601s, it had a 33.9 litre displacement. The first prototype with the direct fuel injection was test run in 1935, and an order for 150 engines was placed in February 1937.

A manufacturing license was granted to Aichi, for production of this engine for the IJN as the Atsuta and to Kawasaki for production of this engine for the IJAAF as the Ha40. Under the 1944 Unified System, this engine was re-designated as the Kawasaki Ha-60.

The Kawasaki Ha40 and the Aichi Atsuta were based on the engine that powered Germany's Messerschmitt Bf 109 fighter.[1]

Ha201

A new high-horsepower narrow-profile engine was required for the Kawasaki Ki-64 experimental fighter. The aircraft design called for a narrow-profile fuselage, and the solution that Kawasaki developed was the Ha-201 engine. Although similar to the Aichi Ha-70, where two Aichi Atsuta engines, mounted side-by-side behind the cockpit driving a single large propeller — an arrangement already used by the Daimler-Benz DB 606 that powered the Heinkel He 119 reconnaissance monoplane prototypes, and later inspired Japan's own Yokosuka R2Y reconnaissance aircraft from the seventh and eighth He 119 prototypes being sold to Japan in May 1940 — for the Japanese Ki-64, its own powerplant installation design called for the two Kawasaki Ha-40 engines to be separately mounted, one in the aircraft's nose, the other behind the cockpit.

The engines were connected to a common gearbox that was mounted in the nose. The rear engine was connected to the nose-mounted gearbox by a long drive shaft similar to the American Bell P-39 Airacobra. The gearbox did not combine the power output of the two engines. Instead, the rear engine drove the forward controllable-pitch propeller, while the front engine independently drove the rearward fixed-pitch propeller.[2]

Variants

Ha40
Up to 1,175 PS (864 kW) at sea-level with 2,500 rpm, up to 1,100 PS (809 kW) at 2,400 rpm and 3.7 km altitude. Used in the Kawasaki Ki-61.
Ha-60
Unified designation for the Ha40
Ha140
An up-rated 1,500 hp development of the Ha40 for high altitude Kawasaki Ki-61-II KAI interceptor aircraft.
Ha201
Two Ha40 coupled together with a common gearbox, driving a twin three-blade contra-rotating propeller. Used in the Kawasaki Ki-64. The combination was rated at 2,350 PS (1,728 kW) at sea-level and 2,500 rpm, up to 2,200 PS (1,618 kW) at 2,400 rpm and 3.7 km altitude.
Ha-72
Unified designation of the Ha201, coupled Ha40

Applications

Ha40
Ha201

Specifications (Ha40)

Data from Francillon, p.119

General characteristics

Components

Performance

See also

Related development
Comparable engines
Related lists

References

Notes

  1. ↑ Francillon, p.119
  2. ↑ Francillon, p.121
  3. ↑ Wilkinson, Stephan (Jan 2003). "With the Noise of a Stone Crusher". Popular Science.

Bibliography

  • Monogram Closeup 13. ISBN 0-914144-13-8.
  • Francillon, R. J., Japanese Aircraft of the Pacific War, Putnam, London, 1970 SBN 370 00033 1
Wikimedia Commons has media related to Kawasaki Ha40.
This article is issued from Wikipedia - version of the 10/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.