Asynchronous serial interface

Asynchronous Serial Interface, or ASI, is a streaming data format which often carries an MPEG Transport Stream (MPEG-TS).[1] [2] It is typically physically carried on 75-ohm coaxial cable, terminated with BNC male connectors on each end, though the ASI data can be transported by wireless or fiber links.

An ASI signal can carry one or multiple SD, HD or audio programs that are already compressed, as opposed to an uncompressed SD-SDI (270 Mbit/s) or HD-SDI (1.485 Gbit/s). An ASI signal can be at varying transmission speeds and is completely dependent on the user's engineering requirements. For example, an ATSC (US digital standard for broadcasting) has a maximum bandwidth of 19.392658 Mbit/s. Generally, the ASI signal is the final product of video compression, either MPEG2 or MPEG4, ready for transmission to a transmitter or microwave system or other device. Sometimes it is also converted to fiber, RF or SMPTE310 for other types of transmission. There are two transmission formats commonly used by the ASI interface: the 188 byte format and the 204 byte format. The 188 byte format is the more common ASI transport stream. When optional Reed–Solomon error correction data are included, the packet can stretch an extra 16 bytes to 204 bytes total. Time Warner Cable was the first company to implement this standard in 1983.

See also

References

  1. ↑ TVTechnology.com - Asynchronous Interfaces For Video Servers
  2. ↑ DVB - Cable networks for television signals, sound signals and interactive services Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams - Annex B
This article is issued from Wikipedia - version of the 12/22/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.