Beef carcass classification

Countries regulate the marketing and sale of Beef by observing criteria of Cattle Carcasses at the Abattoir and classifying the carcasses. This classification, sometimes optional, can suggest a market demand for a particular animal's attributes and therefore the price owed to the producer.

United States grading system

The United States Department of Agriculture's grading system, which has been designed to reward marbling, has eight different grades: Prime, Choice, Select, Standard, Commercial, Utility, Cutter and Canner. Prime has the highest marbling content when compared to other grades, and is capable of fetching a premium at restaurants and supermarkets. Choice is the grade most commonly sold in retail outlets, and Select is sold as a cheaper, but still nutritious, option in many stores. Prime, Choice, Select and Standard are commonly used in the younger cattle (under 42 months of age), and Commercial, Utility, Canner and Cutter are used in older cattle carcasses which are not marketed as wholesale beef "block" meat, but as material used in ground products and cheaper steaks for family restaurants.^[1]

Inspected carcasses tagged by the USDA

In the United States, the USDA Agricultural Marketing Service (AMS) operates a voluntary beef grading program.^[2] The meat processor pays for a trained AMS meat grader to grade whole carcasses at the abattoir. Users are required to comply with Food Safety and Inspection Service (FSIS) grade labeling procedures. The official USDA grade designation can appear in one or any combination of the following ways: container markings, individual bags, legible roller brand appearing on the meat itself, or by a USDA shield stamp that incorporates the quality and/or yield grade.

The United States uses eight beef quality grades. The grades are based on two main criteria: the degree of marbling (intramuscular fat) in the beef, and the maturity (estimated age of the animal at slaughter). Some meat scientists object to the current scheme of USDA grading since it is not based on direct measurement of tenderness, although marbling and maturity are indicators of tenderness. Most other countries' beef grading systems mirror the U.S. model, except for those in the European Union (EU). The EU employs a grading scheme that emphasizes carcass shape and amount of fat covering^[3] instead of marbling and aging. The differences in grading yield incompatible value judgments of beef value in the United States and the EU.^[4] Most beef offered for sale in supermarkets in the United States is graded U.S. Choice or Select. U.S. Prime beef is sold to hotels and upscale restaurants, and usually marketed as such.

• U.S. Prime – Highest in quality and intramuscular fat, limited supply. Currently, about 2.9% of carcasses grade as Prime.^[5]
• U.S. Choice – High quality, widely available in foodservice industry and retail markets. Choice carcasses are 53.7% of the fed cattle total. The difference between Choice and Prime is largely due to the fat content in the beef. Prime typically has a higher fat content (more and well distributed intramuscular "marbling") than Choice.
• U.S. Select (formerly Good) – lowest grade commonly sold at retail, acceptable quality, but is less juicy and tender due to leanness.
• U.S. Standard – Lower quality, yet economical, lacking marbling.
• U.S. Commercial – Low quality, lacking tenderness, produced from older animals.
• U.S. Utility
• U.S. Cutter
• U.S. Canner

Utility, Cutter, and Canner grade are rarely used in foodservice operations and primarily used by processors and canners.

Beef grading service began in 1917 as a way to determine both the quality and the quantity of beef that would come from each carcass. Stamping the grades began in May 1927. Each carcass can be stamped with a yield or quality stamp, or a combination of both. The standards have been revised many times since the original standards were formulated. A few notable changes include combining Prime and choice grades into Prime, and changing the Good grade to choice, this change occurred in 1950. In 1980 conditions were set forth to establish guidance on grading protocol. This included a 10-minute bloom time before the grader evaluates the carcass. Most beef plants will allow a longer time for bloom depending on the speed of the grading chain.

In 1997, the official standards were revised to restrict the Select grade to A maturity carcasses, and to raise the minimum marbling score to qualify for Choice to modest for B maturity cattle. These changes were implemented to improve the uniformity and consistency of the grading system. Yield grades are intended to estimate the pounds of boneless closely trimmed retail cuts from the carcass. Closely trimmed refers to approximately ¼ inch of external fat. Yield grade is determined by considering 4 carcass characteristics: external fat, Kidney, pelvic and heart fat (KPH), Ribeye area (REA), and Hot carcass weight (HCW). The amount of external fat is measured at the ribbed surface between the 12th and 13th ribs. The ribbing of carcasses is described in the U.S. standards for beef grading. External fat is measured at a distance of ¾ the length of the ribeye from the chine bone end. This initial number can be adjusted up or down depending on any abnormal fat deposits. As the amount of external fat increases, the percent of retail cuts decreases.

Kidney fat is assessed subjectively and is expressed as a percentage of the carcass weight. As the percentage of KPH increases, the percent of retail cuts decreases. The ribeye area is measured at the ribbed surface, it can be estimated subjectively or measured with a device approved by the AMS. As ribeye area increase, percent retail cuts increases. Hot carcass weight is used to determine yield grade. As carcass weight increases, percent retail cuts decrease. The following equation is used to determine yield grade:

There are five grades, 1-5. Yield grade one carcasses are of the highest cutability, while yield grade 5 yields the lowest cutability.

Beef sold in U.S. restaurants and supermarkets is usually described by its USDA grade; however, in the early twenty-first century many restaurants and retailers began selling beef on the strength of brand names and the reputation of a specific breed of cattle, such as black Angus.^[6][7]

European Union EUROP Classification

The EUROP grid method of carcass classification was implemented in 1981. European Economic Community Regulations (EEC) No. 1208/81 and No. 2930/81 were enacted to facilitate the application of a community scale for the classification of carcases of adult bovine animals. This was to ensure the uniform classification of the carcases of adult bovine animals in the EEC and make the definitions of conformation classes and fat classes more precise. The need arose for a common grading scale when member states of the EEC began operating in the common beef market in 1968 (EEC) No. 805/68 and price reporting to the EC became mandatory.

In the UK, the Meat and Livestock Commission (MLC Services Ltd) is responsible for the classification of over 80% of the cattle slaughtered in Britain. The EUROP grid consists of a 5-point scale in which each conformation and fat class is subdivided into low medium and high classes resulting in 15 classes. In the UK, the fat classes range from 1-5 with classes 4 and 5 having a high and low sub-class which results in a seven-point scale for fatness (figure 1). It is argued by the MLC that this subdivision allows a more precise description of the carcase.

The price a farmer receives for a beast sent for slaughter is calculated by multiplying the carcase weight by the classification price for a particular category of animal (heifer, steer, bull, cow etc.). This classification is subjectively assigned by the meat grader according to the EUROP system where E is excellent, U is Very Good, R is Good, O is Fair and P is Poor. Likewise for the fat class, where 1 is Low, 2 is Slight, 3 is Average, 4 is High, and 5 is Very High. A typical classification would be R4L where the R refers to a "Good” carcass with an “Average” to “High” covering of fat according to the MLC.

The grader is usually an independent classifier who also monitors carcass dressing specification. Most classifiers are employed by MLC services and they are audited quarterly by the Rural Payments Agency (RPA) which is a government organisation. More recently Video Image analysis has been used to classify beef carcasses according to the EUROP scale. There are several machines that can do this, several of which were trialled in Ireland. The Republic of Ireland has used video image analysis for assignment of the EUROP classification grid since 2004.

Two main problems that are often cited in reference to the EUROP grid are its subjective application and its lack of consideration for meat eating quality.

References