Bronze Medallion (New Zealand and Australia)

In New Zealand and Australia one must gain a Bronze Medallion to become a qualified Surf Lifesaver.^[1]

Testing & Exams

The qualifying test to become a Surf Lifesaver includes both theoretical and practical components.

Theoretical

This includes

• Resuscitation (CPR)
• First Aid
• Signals
• Communication/radios
• Workbook
• Exam

(However the 400m swim of sidestroke, breaststroke, survival backstroke and freestyle is correct)

Practical

• Timed 400m swim in less than 13 mins in either a 25 or 50m pool^[2]
• 4 rescue techniques (tube, board, spinal board and spinal carry)
• Scenarios
• 3 and 5 man carries (5 man phased out in coming seasons)
• Timed run-swim-run in less than 8mins (200-200-200)

Requirements

• Must be within one calendar year of turning 14
• 400m swim in less than 9 minutes (freestyle, can be in pools greater than 25m)
• You must perform a tube and a board rescue
• You must demonstrate putting a patient in the recovery position
• You must demonstrate CPR
• You must demonstrate radio communication & first aid
• You must pass an oral test on First Aid as well as all Surf Lifesaving practices.

The Bronze Medallion

The Bronze Medallion has been issued in New Zealand in a number of styles. The following types have been issued. The numbering is arbitrary and other types may exist.

Type 1. c. 1910.

Obverse: Two swimmers in the water, one rescuing the other. The head and upper body of the person being rescued is visible but the figures of the people are not very clearly defined. In the background is an indistinct shore. Around the edge in a sans-serif font are the words “THE ROYAL LIFE SAVING SOCIETY ESTABLISHED 1891”

Reverse: Around the edge in the same sans-serif font are the words “QUEMCUNQUE MISERUM VEDERIS HOMINEM SCIAS” which may be translated as ‘Whomsoever you see in distress, recognize him as a fellow man.’ In the centre in two lines in a roman font are the words “AWARDED TO” followed by a space in which the recipient’s name and the date of awarding were added. The medallion is 32.5mm in diameter and nearly 3mm thick. It has a loop at the top for a ribbon suspension.

Type 2. c. 1920.

Obverse: Two swimmers in the water – one rescuing the other, one with his/her hands on the side of the head of the second person. Only the heads can be seen. In the background are some hills, trees, and clouds. Otherwise details as Type 1. The medallion is 30mm in diameter and about 2.5mm thick. It has a loop at the top for a ribbon suspension.

NZ & AUS Royal Life Saving Medal Awarded 1934, obverse

NZ & AUS Royal Life Saving Medal Awarded 1934, reverse

Type 3. c. 1930.

Obverse: Two swimmers in the water – one rescuing the other, one with his/her hands on the side of the head of the second person. The whole bodies of both swimmers are clearly seen. The background shore is indistinct. Otherwise details as Type 1 but the wording is in a roman font. Edge of this side has a milled pattern. Reverse. As Type 1 and the edge has a milled pattern. Size is 30mm diameter and 2.5mm thick. With loop for ribbon suspension.

Type 3A. c. 1928.

As Type 3 but with the words “FOR LIFE SAVING SKILL WITH SURF LIFE LINE” on the reverse in a sans-serif font.

Type 3B. c. 1934.

As Type 3 but 3mm thick. See images.

Type 3C. c. 1937.

As Type 3 but 32.5mm diameter and 3mm thick. Oddly, the “LI” of “ESTABLISHED” is in a slightly larger sized font.

Type 4 c. 1940-47.

Obverse: Instead of swimmers the central part consists of a crossed boat hook and oar forming quadrants. In the centre is a clover form made from rope, Around this item are the words “ROYAL LIFE SAVING SOCIETY” in a sans-serif font. The word “LIFE” is uppermost. Around the edge in the same sans-serif font are the words “QUEMCUNQUE MISERUM VEDERIS HOMINEM SCIAS” as in Type 1 reverse.

Reverse: Around the edge in a roman font are the words “ROYAL LIFE SAVING SOCIETY” and in a smaller size “ESTABLISHED 1891” In the centre in two lines in a roman font are the words “AWARDED TO” followed by a space in which the recipient’s name and the date of awarding were added. Size 32mm diameter and about 3mm thick. With loop for ribbon suspension. For a photograph of the medallion see Royal Life Saving Society UK.

Type 4A c. 1954.

Very similar to Type 4 but the centre clover shape is flat rather than rounded. Slightly smaller at just under 32mm in diameter.

Type 5 c. 1960.

Almost the same as Type 4 but the reverse has “ROYAL LIFE SAVING SOCIETY” in a sans-serif font. In a smaller size in a roman font is “ESTABLISHED 1891” The numbers are in ranging style. i.e. the tail of the ‘9’ drops below the baseline of the other numbers. Size otherwise the same but slightly under 2mm thick.

Type 6 c. 1970–present.

A small version of the obverse of Types 4 & 5 but it is uniface only, that is the reverse is plain although sometimes the recipient's name is added there. It is 25mm in diameter.

Ribbons

Some of these medallions were issued with ribbons. The very earliest ones, c 1910, were just a plain darkish blue ribbon. Later ones were a grey-blue ground with a thin central white strip and a thin dark blue strip on either side. There is sometimes attached at the top of the ribbon a clasp containing a bar with “R. L. S. S.” Additionally another bar may be placed centrally with the then current season years on it. e.g. “1961-62” (A southern hemisphere season crosses two calendar years.)

Other Royal Life Saving Society medals or medallions exist such as the Intermediate Star, the Award of Merit, (early ones in hallmarked silver) and the Bronze Cross

References