CANape
|
Screenshot CANape 10.0 | |
| Developer(s) | Vector Informatik |
|---|---|
| Operating system | Windows Vista, 7, 8 |
| Type | Data Acquisition |
| License | Proprietary |
| Website |
www |
CANape is a software tool from Vector Informatik. This development software, widely used by OEMs and ECU suppliers of automotive industries[1] [2] [3] [4] [5] [6] [7] is used to calibrate algorithms in ECUs at runtime.
Description
In calibrating ECUs, control behavior is modified for different vehicle models or variants. This is not done by making changes to the program code, but instead by changing the ECU’s parameterization. This involves the use of measurement and calibration systems such as CANape in the laboratory, on test benches or in vehicles during test trials. To evaluate the effects of changes to parameters, development engineers access the relevant process variables with conventional measurement technology at sensors and actuators and read out the data from the ECU. Measured data internal to the ECU, e.g. intermediate results of a computational function, can be accessed via ASAM standard protocols XCP or CCP and the ECU’s standard interfaces (CAN, FlexRay, LIN, Ethernet/BroadR-Reach). For a high-performance ECU access, data from microcontroller-specific interfaces (for example JTAG, DAP, AURORA) can be converted via an external hardware (like Vector’s VX1000 system) in XCP on Ethernet. A typical use case for calibration with CANape is online calibration. This involves modifying parameters directly in the ECU. The resulting control characteristic can be measured and checked directly. Using this approach, measured data from the ECU or physical measurement variables on or in the vehicle can be precisely analyzed to determine the effects of each individual change.
Features
All functions required to modify parameter values are implemented as standard features in CANape: Measuring, analyzing (manually or automated),[7] calibrating, calibration data management, and flashing. CANape also enables symbolic access to data and functions accessible via the diagnostic protocol, and it supports calibration over XCP on FlexRay.[2] Options extend the functional features of CANape[8] by enabling access to models at runtime in Simulink, functional bypassing, optical verification of object detection algorithms in developing driver assistance systems (ADAS), and an ASAM MCD3 interface.
Versions
Version 1.0 was released in 1996.[9] Up to Version 6.0 the product was known as CANape Graph. The latest version of CANape is 14.0[10] (revision level: June 2015).
Supported Standards
Internal ECU parameters are accessed via standardized measurement and calibration protocols such as CCP (CAN Calibration Protocol) and XCP (Universal Measurement and Calibration Protocol). CANape was the first measurement and calibration tool to enable access over XCP on CAN[1] and XCP on FlexRay.[2]
Supported ASAM standards,[11] status as of June 2015:
- AE MCD-1 XCP
- XCP on CAN Interface Reference
- XCP on Ethernet Interface Reference
- XCP on FlexRay Interface Reference
- XCP on SxI Interface Reference
- XCP on USB Interface Reference
- AE MCD-1 CCP
- AE MCD-2MC ASAP2/A2L
- AE MCD-2D ODX
- AE MCD-2 FIBEX
- AE MCD-3
- COM/DCOM Interface Reference
- ASAP3 (Automation/Optimization Interface)
- MDF
Other supported standards:
- CAN with DBC description format, CAN FD, Ethernet, BroadR-Reach, SOME/IP, FlexRay, LIN, SAE J1939, GMLAN, and MOST
- KWP2000 on K-Line
- ISO 14230 (KWP2000 on CAN) and ISO 14229 (UDS)
- Transport protocols ISO/TF2 and VW-TP2.0
- Integration of measuring devices and hardware interfaces of third-party manufacturers
- iLinkRT
If a development task requires a high measurement data throughput of up to 30 MByte/s, Vector’s VX1000 System[3] can be used to access data over microcontroller-specific data trace and debug interfaces like JTAG, DAP, LFAST, RTP/DMM, Nexus AUX or AURORA.
See also
References
- 1 2 Patzer, A. "A Multifaceted Standard - Optimize ECU Parameters with XCP" (PDF). ATZ elektronik, issue 1/2006. pp. 17–18. Retrieved 23 April 2010.
- 1 2 3 Peteratzinger, M.; Steiner, F.; Schuermans, R. "XCP on FlexRay at BMW" (PDF). Hanser Automotive, issue 9/2006. Retrieved 23 April 2010.
- 1 2 Riedl, A.; Kless, A. "Innovative ECU measurement concept for maximum data rates with minimal effects on execution time" (PDF). Hanser Automotive, issue 9/2009. Retrieved 23 April 2010.
- ↑ Eisenknappl, L.; Kagerer, W.; Koppe, H.; Lamprecht, M.; Meske, A.; Kless, A. "Verification of Object Recognition Algorithms by Driver Assistance Systems at BMW" (PDF). Hanser Automotive, issue 9/2008. Retrieved 23 April 2010.
- ↑ Braun, C.; Morizur, P. "XCP on FlexRay at Audi - AUTOSAR-compatible XCP software modules for FlexRay ECUs" (PDF). Hanser Automotive, issue 7/2008. Retrieved 23 April 2010.
- ↑ Spinner, G.; Patzer, A. "Efficiently developing control concepts at BorgWarner with a cost-effective rapid prototyping solution" (PDF). Hanser Automotive, issue 11/2007. Retrieved 23 April 2010.
- 1 2 Tepe, E.; Patzer, A. "Analyze large quantities of measurement data rationally and flexibly" (PDF). Elektronik automotive, issue 10/2013. Retrieved 22 June 2015.
- ↑ Options for CANape
- ↑ Company History Vector
- ↑ Version History CANape
- ↑ ASAM Products & Services
External links
- CANape on the web site of Vector
- ASAM (Association for Standardisation of Automation and Measuring Systems) – CCP and XCP at standard category "ASAM AE (Automotive Electronics) – Software Development, Connection and Use of Controllers"