Clifton Hampden Bridge

Clifton Hampden Bridge

Clifton Hampden Bridge
Coordinates 51°39′16.5″N 1°12′38″W / 51.654583°N 1.21056°W / 51.654583; -1.21056Coordinates: 51°39′16.5″N 1°12′38″W / 51.654583°N 1.21056°W / 51.654583; -1.21056
Carries Road
Crosses River Thames
Locale Clifton Hampden, Oxfordshire
Maintained by Oxfordshire County Council
Heritage status Grade II* listed
Characteristics
Design Arch
Material Brick
Height 13 feet 5 inches (4.09 m)[1]
Number of spans 6
Piers in water 5
History
Designer George Gilbert Scott
Opened 1867

Clifton Hampden Bridge is a road bridge crossing the River Thames in Clifton Hampden, Oxfordshire, England, situated on the reach below Clifton Lock. Originally it joined Oxfordshire on the north bank with Berkshire on the south but in 1974 the area on the south bank was transferred from Berkshire to Oxfordshire. It is a Grade II* listed building.[2]

Clifton Hampden Bridge was designed by Sir George Gilbert Scott and opened in 1867. The bridge replaced a ferry service which had operated on the site since at least the early 14th century. From its opening a toll was payable but this ceased in 1946 when the County Councils of Berkshire and Oxfordshire joined to buy the bridge from its private owners.

Background

The reach at Clifton Hampden was rocky and shallow, with water levels often dropping to barely 2 feet (0.61 m)[3] so it was usually fordable by cattle and horses. The earliest record of a ferry is a mention of John Broun being ferryman in the early 14th century.[4] The archives of Exeter College, Oxford show that Clifton Ferry was given to the college in 1493 by a Watlington draper called Roger Roper; the college owned the ferry right up until 1861 when it was bought out in preparation for the building of the bridge.[5] In 1607 a ferry at Clifton is mentioned as the downstream limit of improvement works undertaken by the 1605 Oxford-Burcot Commission.[3] In Thomas Baskerville's travel journal of 1692 he notes "At Clifton fferry [sic] is a great boat to carry horse and man"[3] whilst an 1829 tour notes "an ancient ferry" with a "boat passing continually to and fro".[6]

The events that led to the building of the bridge started in August 1826 when the Lord Mayor of London made a ceremonial progress down the Thames from Oxford to London. The Mayoral barge grounded on the rocky outcrops in the shallows at Clifton Ferry and was stuck for several hours whilst the weirs further upstream were opened to raise the water level. This episode led to the building of Clifton Lock and weirs in 1835 which allowed better water management on the reach.[7] Whilst the deeper channel was welcomed by river traffic it prevented the fording of the river by herds of cattle and thus prompted demands for a bridged crossing.[5]

Present structure

The bridge and village from Clifton Lock upstream

The driving force behind the building of the bridge was Henry Hucks Gibbs, a banker, businessman and Governor of the Bank of England. Gibbs inherited the Lord of the Manor of Clifton Hampden on the death of his father in 1842 and devoted time and money to modernising the estate. He built new estate cottages, a new manor house, renovated and restored the Church of St Michael and All Angels as well as building the bridge.[5]

In 1861 Gibbs purchased the ferry rights from Exeter College and applied for permission to build a bridge. This was granted in an Act of Parliament of 23 June 1864 stating the "local and public advantage" of linking Clifton Hampden with the Parish of Long Wittenham[5] and granting the right to levy a toll.[4] Gibbs selected George Gilbert Scott as the architect for all his improvements and a popular story, possibly apocryphal, tells how Scott drew the initial design for the bridge on his starched shirt-cuff over dinner with Gibbs.[5]

The bridge was built of red brick supplied from a kiln that Gibbs had built on Clifton Heath to service his other modernisations. Scott's design has six gothic arches with spans from 24 feet (7.3 m) to 34 feet (10 m). The five brick piers have triangular cutwaters which extend upwards to provide pedestrian refuges. The total cost of the construction was £3,617 (equivalent to £289,000 today[8]) which was met by Gibbs, the unusually low tolls being levied only to meet the cost of ongoing maintenance. The bridge opened in 1867 with its builder, Richard Casey, as toll keeper.

In 1931 the bridge was nearly demolished as part of Berkshire County Council's policy of replacing toll bridges. New plans for a steel beam and trestle bridge were drawn up but the intervention of the Second World War put the plans on hold. In 1946 the Councils of Oxfordshire and Berkshire purchased the bridge from Lady Aldenham for £1,850 (£69,000 [8]) and decided to retain Scott's brick structure. On 4 October 1946 the bridge was made free, the first vehicle to cross being a fairground caravan.[5]

See also

References

References
  1. ↑ River Thames Alliance. Bridge heights on the River Thames.
  2. ↑ "Name: CLIFTON HAMPDEN BRIDGE List entry Number: 1059815". Historic England. Retrieved 18 June 2015.
  3. 1 2 3 Thacker 1920, p. 173
  4. 1 2 Lobel 1962, pp. 16–27
  5. 1 2 3 4 5 6 Phillips 1981, p. 65
  6. ↑ Walton 1834, p. 122
  7. ↑ Phillips 1981, p. 64
  8. 1 2 UK CPI inflation numbers based on data available from Gregory Clark (2016), "The Annual RPI and Average Earnings for Britain, 1209 to Present (New Series)" MeasuringWorth.
Bibliography

External links

Next crossing upstream River Thames Next crossing downstream
Appleford Railway Bridge (railway) Clifton Hampden Bridge Day's Lock (pedestrian)
Next crossing upstream Thames Path Next crossing downstream
northern bank
Abingdon Lock		 Clifton Hampden Bridge southern bank
Day's Lock
This article is issued from Wikipedia - version of the 11/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.