Bavarian GtL 4/4

Bavarian GtL 4/4 , LAG nr. 80–81
DRG Class 98.8–9, 16
Number(s) DRG 98 801–917, 1601–1602
Quantity 119
Manufacturer Krauss
Year(s) of manufacture 1911–1927
Retired 1970
Wheel arrangement 0-8-0
Axle arrangement D h2t
Gauge 1,435 mm (4 ft 8 1⁄2 in)
Length over buffers 9,250 mm
Service weight 43.0–46.7 t
Adhesive weight 43.0–46.7 t
Axle load 10.8 t
Top speed 40 km/h
Indicated Power 330 kW
Driving wheel diameter 1,006 mm
No. of cylinders 2
Cylinder bore 508 mm
Piston stroke 460 mm
Boiler Overpressure 12 bar
Grate area 1.36 m²
Superheater area 18.93 m²
Evaporative heating area 60.99 m²
Locomotive brakes compressed-air brakes

The Bavarian Class GtL 4/4 engines were superheated steam locomotives in service with the Royal Bavarian State Railways (Königlich Bayerische Staats-Eisenbahnen) for duties on branch lines (Lokalbahnen).

History

Bavarian GtL 4/4 locomotives were supplied by Krauss to the state railway. In 1911, two were delivered and, in 1914, they were followed by a further eleven engines.

As a result of their positive experience with the GtL 4/4 the Bavarian Group Administration (Gruppenverwaltung Bayern) of the Deutsche Reichsbahn decided to procure more examples of this locomotive. From 1921 to 1927 Krauss supplied another 108 engines that were somewhat heavier and differed from the original versions in the design of the driver's cab. The last 17 locomotives from 1927 were even heavier than the previous engines, which was due to the increased size of water and coal tanks. Boiler, drive and power remained unchanged over the entire procurement period. The locomotives were designated as DRG Class 98.8-9 by the Reichsbahn, and were given the numbers 98 801 to 98 917.

GtL 4/5

Although the GtL 4/4 proved very successful, the Deutsche Reichsbahn decided to order a modified, faster version. This resulted in the DRG Class 98.10, unofficially called the GtL 4/5, which had a trailing axle in the shape of a Krauss-Helmholtz bogie. A total of 45 were built between 1930 and 1933.

Despite the trailing axle the top speed could only be raised to 45 km/h so the Reichsbahn decided to rebuild existing GtL 4/4s, this time adding a leading Bissel axle. Confusingly the unofficial Bavarian notation for these was also GtL 4/5, but the Reichsbahn classified them as the DRG Class 98.11, which had a top speed of 55 km/h. A total of 29 were converted in this way.

Lokalbahn AG locomotives

The Lokalbahn Company (Lokalbahn Aktien-Gesellschaft or LAG) had also bought two GtL 4/4 machines in 1922, that were identical to the state railway versions from 1921. The vehicles, with running numbers 80 and 81, were stabled at Thalkirchen shed on the Isar Valley line (Isartalbahn). They remained there even after being taken over by the Reichsbahn. They were later converted to a 1'D1' configuration, but unlike the other GtL 4/4 locos, were grouped into DRG Class 98.16 and given numbers 98 1601 and 98 1602.

Retirement

During the Second World War five locomotives were destroyed, a further three remained with the Czechoslovakian State Railways (ČSD). The remaining machines went into the Deutsche Bundesbahn, which began retiring them in the 1950s. The two LAG engines were sent to Rosenheim shed in 1950 and were retired in 1957 and 1958.

Preserved locomotives

Two locomotives, numbers 98 812 and 98 886, were given EDP operating numbers in 1968, but were retired shortly thereafter. Both locomotives have been preserved: number 98 812 is a working museum locomotive with the Ulm Railway Society (Ulmer Eisenbahnfreunde). Number 98 886 has been made operational again and hauls the Little Rhön Train (Rhön-Zügle) from Mellrichstadt to Fladungen.

Gallery

The only working GtL 4/4, number 98 886, on the Mellrichstadt-Fladungen museum railway in August 2006.

See also

This article is issued from Wikipedia - version of the 7/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.