Desalter
A desalter is a process unit in an oil refinery that removes salt from the crude oil. The salt is dissolved in the water in the crude oil, not in the crude oil itself. The desalting is usually the first process in crude oil refining. The salt content after the desalter is usually measured in PTB - pounds of salt per thousand barrels of crude oil.[1] Another specification is Basic sediment and water
The term desalter may also refer to a water desalination facility used to treat brackish water from agricultural runoff. This may be done either to produce potable water for human or animal consumption, or to reduce the salinity of river water prior to its crossing an international border, usually to comply with the terms of a treaty. Desalters are also used to treat groundwater reservoirs in areas impacted by cattle feedlots and dairies.
Desalting crude oil
The salts that are most frequently present in crude oil are calcium, sodium and magnesium chlorides. If these compounds are not removed from the oil several problems arise in the refining process. The high temperatures that occur downstream in the process could cause water hydrolysis, which in turn allows the formation of corrosive hydrochloric acid. Sand, silts and salt cause deposits and foul heat exchangers or result in plugging. The need to supply heat to vaporize water reduces crude pre-heat capacity. Sodium, arsenic and other metals can poison catalysts. By removing the suspended solids, they are not carried into the burner and eventually flue gas, where they would cause problems with environmental compliance such as flue gas opacity norms.
References
- ↑ "Measurement of salt content in petroleum flow lines - Patent 4352288". Retrieved 2009-03-11.