Honda B engine
Honda B engine | |
---|---|
Overview | |
Manufacturer | Honda |
Production | 1989–2001 |
Combustion chamber | |
Configuration | DOHC inline four |
Chronology | |
Successor | Honda K engine |
The B-series are a family of inline four-cylinder DOHC automotive engines introduced by Honda in 1989. Sold concurrently with the D-series which were primarily SOHC engines designed for more economical applications, the B-series were aimed more as a performance option featuring dual-overhead cams along with the first application of Honda's VTEC system (available in some models). To identify a Honda B-series engine, the letter B is normally followed by two numbers to designate the displacement of the engine, another letter, and in US-spec engines, another number. The Japanese spec-engines are normally designated with a four character alphanumeric designation.[1] The B-series, the B20B variant in particular, is not to be confused with the earlier Honda B20A engine introduced in 1985 and primarily available in the Prelude and Accord-derived vehicles from 1985-1991. While sharing some design elements and both being multivalve Honda four-cylinders, the B-series and B20A differ substantially in architecture, enough to be considered distinct engine families.
They were made in 1.6-, 1.7-, 1.8-, and 2.0-liter variants, with and without VTEC (Variable Valve Timing and Lift Electronic Control). Later models have minor upgrades including modifications to the intake valves and ports and piston tops, along with individual cylinder oil injectors (B18C models). They produce between 120 hp (89 kW) and 200 hp (149 kW), with some models capable of a redline over 8,500 rpm.
Although it has so many variations, the basic design differs very little among the B-Series. There are actually two short blocks which are used for the entire series. The main difference between them was the deck height. The one used for B16 and B17 engines (except for B16B) has a deck height of 203.9mm while the short block used for B16B, B18 and B20 engines has a deck height of 212mm.[2]
The Honda B16 has appeared in six different forms over the years. The Honda B-series was replaced by the K-series in Civic, Integra, and CR-V applications.
B16
B16A SIR-V (First Generation)
The first VTEC engine.
- B16A found in:
- 1989-1993 Honda Integra XSi
- 1989-1991 Honda CRX SiR (EF8)
- 1989-1991 Honda Civic SiR (EF9)
- Displacement: 1,595 cc (97.3 cu in) 1.6-litre
- Compression: 10.2:1
- Bore: 81.0 mm (3.2 in)
- Stroke: 78.4 mm (3.1 in)
- Rod Length: 134 mm (5.3 in)
- Rod/stroke ratio: 1.745
- Power: 158 HP @ 7,600 rpm & 110 ft·lbf (150 N·m) @ 7000 rpm
VTEC engagement: 4500 rpm
- Redline: 8000rpm
- Rev Limiter: 8200rpm
- Transmission: S1/J1/YS1 (4.4 final drive, cable clutch, optional LSD for YS1), Y1 (4.266 final drive, cable clutch, optional LSD)
- ECU code: P-fk1 (DA6/DA8/EF8), PW0 (EF8/EF9/DA6), PR3 (EF8/EF9) OBD0
JDM B16A SIR-II (Second Generation)
- Found in:
- 1992–1993 JDM Honda Integra "XSi" (DA6)
- 1992–1994 JDM Honda Civic SiR/SiRII (EG6)
- 1992–1993 JDM Honda Civic Ferio SiR (EG9)
- 1992–1995 JDM Honda CR-X del Sol SiR (EG2)
- 1996–1998 JDM Honda Civic SiR/SiRII (EK4)
- 1995–1998 JDM Honda Civic Ferio Si (EK4)
- Displacement: 1,595 cc (97.3 cu in) 1.6-liter
- Compression: 10.5:1
- Bore: 81.0 mm (3.2 in)
- Stroke: 77.4 mm (3.0 in)
- Rod Length: 134 mm (5.3 in)
- Rod/stroke ratio: 1.745
- Power: MT: 172 PS (127 kW; 170 hp) @ 8400 rpm & 16.0 kg·m (157 N·m; 116 lb·ft) @ 2000
- VTEC engagement: 5700 rpm
- Redline: 8200 rpm (AT: 7900 rpm )
- Transmission: YS1/S4C/Y21/S21 (4.4 final drive, optional LSD)
- ECU code: P30 (EG2/EG6/EG8/EG9), PR3 (DA6)
- OBD1 P2T (EK4) OBD2
B16B (Type R)
- Found in:
- 1997–2000 Civic Type R
- Displacement: 1,595 cc (97.3 cu in)
- Compression: 10.8:1
- Bore: 81 mm (3.2 in)
- Stroke: 77.4 mm (3.0 in)
- Rod/Stroke ratio: 1.85:1
- Rod Length: 142.42 mm (5.6 in)
- Power: 185 hp (138 kW) @ 8200 rpm & 118 lb·ft (160 N·m) @ 7500 rpm
- Redline: 8500 rpm
- Rev-limit: 9000 rpm
- Transmission: S4C With Helical LSD (4.4 final drive, dual-synchromesh on 2nd, 3rd and 4th gears)
- VTEC engagement 6000 rpm
- ECU code: PCT
- ECU Socket Type: OBD-2A (1996-1998 models) / OBD-2B (1999-2000 models)
- 1997–2000 Civic Type R
- Note: This engine uses the same block as the '96 Spec JDM B18C Integra Type R, which is taller than the B16A block (by approx 17 mm), but with a crank the same stroke as the B16A. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard B16.[3]
B16A1
- VTEC
- Found in:
- CRX'1.6 DOHC VTEC (EE8) - European Market (EDM)
- Civic'1.6 DOHC VTEC(EE9) - European Market (EDM)
- Displacement: 1.6-liter (1595)
- Bore×Stroke: 81.0×77.4 mm (3.19×3.05 in)
- Compression: @ 10.5:1
- Power: 150 hp (112 kW) @ 7600 rpm
- Torque: 111 lb·ft (150 N·m) @ 7100 rpm
- Redline: 8200 RPM
- VTEC engagement @ 5200 RPM
- Transmission: Y2
- OBD0
- ECU CODE: PW0
B16A2
- DOHC VTEC
- Found in:
- 1992-2000 Honda Civic EDM VTi (EG6/EG9 & EK4)
- 1992-1997 Honda Civic del Sol EDM VTi (EG)
- USDM (EG2)
- 1999-2000 Honda Civic USDM Si (EM1)
- 1999-2000 Honda Civic SiR Philippines (EK4 sedan)
- 1999-2000 Honda Civic CDM SiR (EM1)
- Displacement: 1,595 cc (97.3 cu in)
- Power (bhp@rpm): 160 hp (119 kW) @ 7,600 rpm & 111 lb·ft (150 N·m) @ 7,500 rpm
- Compression: 10.2:1
- VTEC Engagement @5,600rpm
- Redline @8,000rpm
- rev-limit @8,500rpm
- Bore×Stroke: 81.0×77.4 mm (3.19×3.05 in)
- Transmission: Y21. S4c
B16A3
- DOHC VTEC
- Found in:
- 1994-1995 Del Sol VTEC
- Displacement: 1,595 cc (97.3 cu in)
- Power (bhp@rpm): 160 hp (119 kW) @ 7,600 rpm & 111 lb·ft (150 N·m) @ 7,500 rpm
- Compression: 10.4:1
- VTEC Engagement @5,600rpm
- Redline @8,200rpm
- rev-limit @8,500rpm
- Bore×Stroke: 81.0×77.4 mm (3.19×3.05 in)
- Transmission: Y21
B16A5
- VTEC
- Found in:
- 1996-2000 Civic Si-RII (JDM version) (EK4)
- Displacement: 1,595 cc (97.3 cu in)
- Compression: 10.4:1
- Power: 125 kW ( 167 bhp) @ 7800 rpm & 111 ft•lbf (150 N•m) @ 7300 rpm
- Redline: 8200 rpm
- Transmission: Y21
- Note: Only offered with SiRs with automatic transmissions.
- 1996-2000 Civic Si-RII (JDM version) (EK4)
B16A6
- VTEC
- Found in:
- 1996–2000 Honda Civic – Middle East & South Africa VTEC (EK)
- Displacement: 1,595 cc (97.3 cu in)
- Compression: 10.2:1
- Power: 118 kW (158 hp) @ 7800 rpm & 111 lb·ft (150 N·m) @ 7000 rpm
- Transmission: S4C
- 1996–2000 Honda Civic – Middle East & South Africa VTEC (EK)
B17
B17A1*
- VTEC
- Found in:
- 1992–1993 Integra GS-R (USDM VTEC Model VIN DB2)
- Displacement: 1,678 cc (102.4 cu in)
- Bore: 81 mm (3.189 in)
- Stroke: 81.4 mm (3.205 in)
- Rod/Stroke Ratio: 1.63
- Rod Length: 132.28 mm (5.208 in)
- Compression: 9.7:1
- VTEC engagement; VTEC Solenoid Engagement @ 5500
- Power: 160 bhp (119 kW) @ 7600 rpm & 117 lb·ft (159 N·m) @ 7000 rpm
- Redline: 8000
- Fuel Cutoff: 8250rpm
- First DOHC VTEC B series to be marketed in North America as Export only. Not Available in Japan.
- Came equipped with the YS1 cable transmission, which was different from other cable B-series YS1 transmissions as it has a different input shaft and a shorter final drive.
- 1992–1993 Integra GS-R (USDM VTEC Model VIN DB2)
B18
B18A1
- Found in:
- 1990–1991 Acura Integra USDM "RS/LS/LS Special Edition/GS" (DA9 Liftback/Hatchback, DB1 Sedan)
- OBD0
- Displacement: 1,834 cc (111.9 cu in)
- Compression: 9.2:1
- Bore: 81 mm (3.2 in)
- Stroke: 89 mm (3.5 in)
- Rod Length: 137.01 mm (5.394")
- Rod/Stroke Ratio: 1.54
- Redline: 7,900 rpm
- Rev Limiter: 8,200 rpm
- Programmed fuel injection
- Power: 130 bhp (97 kW; 132 PS) @ 6000 rpm & 121 lb·ft (164 N·m) @ 5000 rpm
- Transmission: S1, YS1, cable. Smaller diameter input shaft compared to traditional 92-01 B-series transmissions.
- 1990–1991 Acura Integra USDM "RS/LS/LS Special Edition/GS" (DA9 Liftback/Hatchback, DB1 Sedan)
The Japanese B18A is not considered part of the modern B-series family. This engine shares many characteristics with the B20A/B21 See Honda B20A engine.
- 1986–1989 Accord Aerodeck LXR-S/LX-S (Japan)
- 1986–1989 Accord EXL-S/EX-S (Japan)
- 1986–1989 Vigor MXL-S (Japan)
- Displacement: 1,834 cc (111.9 cu in)
- Compression: 9.4:1:3
- Bore: 81 mm (3.2 in)
- Stroke: 89 mm (3.5 in)
- Dual Keihin Carbs
- Power: 100 hp (75 kW) @ 6100 rpm & 128 lb·ft (174 N·m) @ 4700 rpm
- Transmission: A2N5, E2N5
B18A1
- Non-VTEC
- Found in:
- 1992–1993 Acura Integra JDM "RS/LS/LS Special Edition/GS" (DA9 Liftback/Hatchback, DB1 Sedan)
- OBD1 PR4 ECU
- Displacement: 1,834 cc (111.9 cu in)
- Compression: 9.2:1
- Bore: 81 mm (3.2 in)
- Stroke: 89 mm (3.5 in)
- Rod Length: 137.01 mm (5.394")
- Rod/Stroke Ratio: 1.54
- Redline: 6400 rpm
- Rev Limiter: 7200 rpm
- Programmed fuel injection
- Power: 140 bhp (104 kW; 142 PS) @ 6300 rpm & 131 lb·ft (178 N·m) @ 6100 rpm
- Transmission: YS1, cable. Larger diameter input shaft than 90-91 transmissions. Interchangeable with 94-01 transmissions.
- 1992–1993 Acura Integra JDM "RS/LS/LS Special Edition/GS" (DA9 Liftback/Hatchback, DB1 Sedan)
B18A2
- Non-VTEC
- Found in:
- 1990–1993 Honda Integra DB1 Sedan "LS" Made in Japan (assembled in India)
- OBD0 PR4 ECU
- Displacement: 1,834 cc (111.9 cu in)
- Compression: 9.2:1
- Bore: 81 mm (3.2 in)
- Stroke: 89 mm (3.5 in)
- Rod Length: 137.01 mm (5.394")
- Rod/Stroke Ratio: 1.54
- Redline: 6600 rpm
- Rev Limiter: 7000 rpm
- Programmed fuel injection
- Power: 140 bhp (104 kW; 142 PS) @ 6300 rpm? & 131 lb·ft (178 N·m) @ 6100 rpm?
- Transmission: YS1, cable. Larger diameter input shaft than 90-91 transmissions. Interchangeable with 94-01 transmissions.
- 1990–1993 Honda Integra DB1 Sedan "LS" Made in Japan (assembled in India)
B18B1
- Found in:
- 94-01 Integra RS/LS/SE/GS - DB7/DC4/DC3
- 1994–2000 Honda Integra "RS/LS/GS/SE/(GSI Australia)" (DC4/DB7)
- 1992–1996 JDM Honda Domani (MA5)
- 1993–1994 JDM Honda Integra (DB7)
- 1996–1999 JDM Honda Orthia (EL1)
- Displacement: 1,834 cc (111.9 cu in)
- Compression: 9.2:1
- Bore: 81 mm (3.2 in)
- Stroke: 89 mm (3.5 in)
- Rod Length: 137.01 mm (5.394")
- Rod/Stroke Ratio: 1.56
- Power: 142 bhp (106 kW) @ 6300 rpm & 127 lb·ft (172 N·m) @ 5200 rpm
- Redline: 6800 rpm (7200 rpm on JDM Domani)
- Rev Limit: 7300 rpm
- Transmission: Y80/S80
- JDM version is marked B18B on the block without any number.
- JDM version has 9.4:1 compression ratio whereas the USDM version has 9.2:1.
- JDM version's higher compression ratio and factory tuning results in higher torque and power ratings
JDM B18C Type R
- DOHC VTEC
- Found in:
- 96-01 JDM Honda Integra Type R DC2
- Rev-limit: 8900 rpm
- Power: 200 hp (149 kW) @ 8000 rpm & 137 lb-ft @ 6700 rpm (96specR) 200 hp (149 kW) @ 8000 rpm & 137 lb-ft @ 6200 rpm (98specR)
- Transmission: S80 with Helical LSD
- S80 spec: J4D (96 Spec: 4.4 final drive), N3E (98 Spec: 4.785 final drive w/ 1.034 4th & .787 5th Gears)
- Displacement: 1,797 cc (109.7 cu in)
- Compression: 11.1:1
- Bore: 81 mm (3.2 in)
- Stroke: 87.2 mm (3.4 in)
- Rod Length: 137.9 mm (5.4 in)
- Rod/Stroke Ratio: 1.58
- VTEC Engagement @ 5800 rpm (96specR) 5800 rpm (98specR)
- ECU code: P73-003 (96specR) P73-013 (98specR)
- 96-01 JDM Honda Integra Type R DC2
JDM B18C
SiR-G/GSR
- VTEC
- Found in:
- 95-98 JDM Honda Integra SiR/SiR II (DB8, DC2)
- 98-99 JDM Honda Integra SiR-G (DB8, DC2)
- Identification: Black valve cover with dual runner intake manifold
- Red Line: 8200 rpm
- Rev-Limit: 8484 rpm- 8550 rpm (*For some only, most newer model SIR/SIR-G cut off at 8254 rpm)
- Power: 132.5 kW (180 PS; 178 bhp) @ 7200 rpm & 126 lb·ft (171 N·m) @ 6200 rpm
- Displacement: 1,797 cc (109.7 cu in)
- Compression: 10.6:1
- Bore: 81 mm (3.2 in)
- Stroke: 87.2 mm (3.4 in)
- ECU code: P72
- VTEC Engagement @ 5800 rpm
- Transmission Y80 (with optional LSD)
B18C1
- DOHC VTEC
- Found in:1994–2001 USDM Integra GS-R (DC2)2dr (DB8)4dr
- Displacement: 1,797 cc (109.7 cu in)
- Compression: 10.1.:1
- Bore: 81 mm (3.2 in)
- Stroke: 87.2 mm (3.4 in)
- Rod Length: 140.0 mm (5.5 in)
- Rod/Stroke Ratio: 1.58
- Power: 170 hp (127 kW) @ 7600 rpm
- Torque: 128 lb·ft (174 N·m) @ 6200 rpm
- Redline: 8000 rpm (Fuel Cut-off @ 8200 rpm)
- Secondary Runners Open @ 6,000 rpm
- VTEC Engagement @ 4,700 rpm
ECU code: P72
B18C2
- DOHC VTEC
- Found in:
- 1994-1995 Honda Civic Ferio Sedan North America, Europe, Japan and New Zealand Market.
- 1994-2001 Honda Integra VTi-R Australia/New Zealand Market.
- Compression: 10.0:1
- Displacement: 1,797 cc (109.7 cu in)
- Bore: 81mm
- Stroke: 87.2mm
- Power: 179 hp (133 kW) @ 7300 rpm
- Torque: 128 lb·ft (174 N·m) @ 6200 rpm
- Redline: 8000 rpm (Fuel cut-off @ 8200 rpm)
- VTEC Engagement @ 4500 rpm
- IAB Engagement @ 6000 rpm
- Transmission: Y80 (obd1) - S80 (obd2)
- ECU code: P79
B18C3
- DOHC VTEC
- Found in:Acura Integra Asian Market, USDM Acura Integra GSR (2000 model)
- Power: 190 PS (139 kW; 187 hp) @ 7600 rpm & 128 lb·ft (174 N·m) @ 7500 rpm
- Compression: 10.8:1
- Displacement: 1,797 cc (109.7 cu in)
- Bore: 81mm
- Stroke: 87.2mm
B18C4
- VTEC
- Found in:
- 1996–2000 UK Civic
- VTi 5-door Hatch (MB6)
- 1996–2000 UK Civic 1.8i VTi-S (Limited Edition) 5-door Hatch (MB6)
- 1996–2000 UK Civic Aerodeck 1.8i VTi 5-door Wagon (MC2)
- 1998–1999 EU Civic Aerodeck 1.8i VTi 5-door Wagon (MC2)
- 1998–1999 EU Civic 1.8i VTi 5-door Hatch (MB6)
- Displacement: 1,797 cc (109.7 cu in)
- IAB open @ 5750 rpm
- VTEC engagement@ 4300 rpm
- Compression: 10.0:1
- Power: 169 hp (126 kW) @ 7600 rpm & 128 lb·ft (174 N·m) @ 6200 rpm
- Limit: 8,100 rpm
- Transmission: S9B 4.26 final drive TORSEN LSD.
- ECU code: 37820-P9K-E11 (1997-1999) 37820-P9K-G11 (2000-2001)
- stroke 87.2
B18C5
- VTEC
- Found in: USDM/CDM DC2 Acura Integra Type-R (Integra Type-R)
- 1997, 1998, 2000, 2001 Integra Type-R (Note:1997-2001 CDM)
- Displacement: 1,797 cc (109.7 cu in)
- Compression: 10.6:1
- Bore: 81 mm (3.2 in)
- Stroke: 87.2 mm (3.4 in)
- Rod Length: 137.9 mm (5.4 in)
- Rod/Stroke Ratio: 1.58
- Power: 195 hp (145 kW) @ 7800 rpm & 130 lb·ft (176 N·m) @ 7500 rpm
- Redline: 8400rpm (Fuel cut-off @ 8500rpm)
- VTEC Engagement @ 6000 rpm
- Transmission: S80 w/LSD
- 1997, 1998, 2000, 2001 Integra Type-R (Note:1997-2001 CDM)
B18C6
- VTEC
- Found in:
- 1998–2001 Honda Integra UK and Euro Spec Type R
- Type: 1.8-litre 16v DOHC 4-cylinder in-line
- Displacement: 1,797 cc (109.7 cu in)
- Compression: 12.0:1
- Air intake diameter: 62 mm (2.4 in)
- Bore: 81 mm (3.2 in)
- Stroke: 87.2 mm (3.4 in)
- Rod Length: 137.9 mm (5.4 in)
- Rod/Stroke Ratio: 1.58
- Power: 190 PS (139.7 kW) @ 7900 rpm & 131 lb·ft (178 N·m) @ 7300 rpm
- Redline: 8400 rpm
- Rev-limiter: 8600 rpm
- VTEC engagement: 5900 rpm
- Transmission: S80 w/LSD
- 1998–2001 Honda Integra UK and Euro Spec Type R
B18C7
- VTEC
- Found in:
- 1999 - 2001 Honda Integra Type R (Australia)
- Power: 199 PS (146 kW; 196 hp) @ 8200 rpm & 130 ft·lbf/172 N·m @ 7500 rpm
- Compression: 11.1:1
- Displacement: 1797 cc (109.7 cu in)
- Rev-limit: 8500 rpm
- Redline: 8400 rpm
- VTEC Engagement @ 5700 rpm
- Transmission: Helical LSD
- 1999 - 2001 Honda Integra Type R (Australia)
B20
B20B-B20B4
- 1996–1998 specs
- Non-VTEC
- Found in: USDM and JDM Honda CR-V, JDM Orthia, Stepwgn, S-MX
- Displacement: 1,973 cc (120.4 cu in)
- Power: 126–142–140 hp (94–106–104 kW) @ 5400 rpm
- Torque: 133 lb·ft (180 N·m) @ 4800
- Rod length: 137 mm (5.4 in)
- Compression: B20B4 (AO PISTONS) 8.8:1 (P8R) or 9.2:1 (P75)
- Bore: 84 mm (3.3 in)
- Stroke: 89 mm (3.5 in)
- Redline: 6500 rpm
- No Knock Sensor
- Low Compression engine
- Found in: USDM and JDM Honda CR-V, JDM Orthia, Stepwgn, S-MX
B20B/B20Z2
- 1999 - 2001 specs
Non VTEC
- Found in: USDM CR-V as a B20Z2, CR-V and Honda Orthia as a B20B
- Displacement: 1,973 cc (120.4 cu in)
- Power: 150–148 hp (112–110 kW) @ 6200 rpm
- Torque: 140 lb·ft (190 N·m) @ 5500 rpm
- Rod length: 137 mm (5.4 in)
- Compression: 9.4:1 (P8R)-9.6:1 (P75)
- Bore: 84 mm (3.3 in)
- Stroke: 89 mm (3.5 in)
- Redline: 6,800 rpm
B20B JDM
- 1995–1997 spec
- Non-VTEC
- Found in: JDM Honda Orthia, CR-V
- Displacement: 1,972 cc (120.3 cu in)
- Power: 145 hp (108 kW) @ 6200 rpm
- Torque: 178 N·m (131 lbf·ft) @ 5200 [4500 rpm 2.0GX-S]
- Rod length: 137 mm (5.4 in)
- Compression: 9.2:1
- Bore: 84 mm (3.3 in)stroke: 89 mm (3.5 in)
- Redline: 6700 rpm
- Rev limit: 7300 rpm
- Found in: JDM Honda Orthia, CR-V
- 1998-2002 specs
- Non-VTEC
- Displacement: 1,972 cc (120.3 cu in)
- Power: 150 hp (112 kW) @ 6300 rpm
- Torque: 184 N·m (136 lbf·ft) @ 4500
- Rod length: 137 mm (5.4 in)
- Compression: 9.6:1
- Bore: 84 mm (3.3 in)stroke: 89 mm (3.5 in)
- Redline: 6500 rpm
- Rev limit: 7200 rpm
- Source http://www.honda.co.jp/auto-archive/
B20A/B21A
The B20A3 and B20A5 are the predecessor to the B family. All B-series engines were based from the B20A, but most engine components are not compatible. For more information, refer to the F3-series Honda race car that used a B20A engine. 200 hp with little mods Also see Honda B20A engine.
B Series Transmissions
Note: All (1992 up, non-Prelude) "Big Spline" B series Transmissions are interchangeable. YS1 casing can take S80 Internals or a hydraulic conversion kit can be used to operate hydraulic transmissions in cable operated models, however A1/S1/J1/Y1 internals do not swap into the later model YS1 or hydraulic casings due to different shaft diameters.
J1/S1
- Found in: Integra XSI/RSI (DA6), Civic SiR (EF9), CRX SiR (DA9, EF8)
- Type: Cable
- 1st: 3.25
- 2nd: 2.052
- 3rd: 1.416
- 4th: 1.103
- 5th: 0.906
- R: 3.000
- FD: 4.400
A1/YS1
- Found in: 1990-93 USDM Integra LS/RS/GS (DA)
- Type:cable
- 1st: 3.23
- 2nd: 1.901
- 3rd: 1.269
- 4th: 0.966
- 5th: 0.742
- R: 3.000
- FD: 4.266
Y1
- Found in: CRX/Civic (optional LSD)
- Type: Cable
- 1st: 3.166
- 2nd: 2.052
- 3rd: 1.416
- 4th: 1.103
- 5th: 0.870
- R: 3.000
- FD: 4.266
Y2
- Found in: CRX/Civic UKDM
- Type: Cable
- 1st: 3.166
- 2nd: 2.052
- 3rd: 1.416
- 4th: 1.152
- 5th: 0.870
- R: 3.000
- FD: 4.133
YS1
- Found in: Integra 92-93 XSI/RSI, USDM GS-R (DA6, DA9)
- Type: Cable
- 1st: 3.307
- 2nd: 2.105
- 3rd: 1.459
- 4th: 1.107
- 5th: 0.880
- R: 3.000
- FD: 4.400
S80/N3E
- Found in: Integra Type R Spec R 98+ (LSD)
- Type: Hydraulic
- 1st: 3.230
- 2nd: 2.105
- 3rd: 1.458
- 4th: 1.034
- 5th: 0.787
- R: 3.000
- FD: 4.785
S80/Y80
- Found in: JDM SiR-G (optional LSD) / 94+ USDM GS-R (no LSD)
- Type: Hydraulic
- 1st: 3.231
- 2nd: 1.923
- 3rd: 1.431
- 4th: 1.034
- 5th: 0.787
- R: 3.000
- FD: 4.400
S9B
- Found in:
- EDM/UKDM 96-01 Honda Civic 1.8 VTi MB6 (optional Torsen LSD)
- EDM/UKDM 97-01 Honda Civic Aerodeck 1.8 VTi MC2 (optional Torsen LSD)
- UKDM 1998 Honda Civic 1.8 VTi-S MB6 (Torsen LSD)
- UKDM 1998 Honda Civic Aerodeck 1.8 VTi-S MC2 (Torsen LSD)
- Note: Torsen LSD is the same as a S80 Helical LSD but with a different brand name, nevertheless both LSD share the same part number by Honda in UK and Europe (41200-P80-003).
- Type: Hydraulic
- 1st: 3.230
- 2nd: 1.900
- 3rd: 1.360
- 4th: 1.034
- 5th: 0.848
- R: 3.000
- FD: 4.267
Y21/Y80/S80/S4C
- Found in:
- JDM 96-97 Integra R(LSD)
- JDM Civic Type R [EK9](LSD)
- JDM Civic SiR [EK4, EG6](optional LSD)
- JDM CR-X DEL SOL SIR (EG2)(optional LSD)
- USDM DEL SOL VTEC (EG2)(OPTIONAL LSD)
- UKDM Civic Vti (EG6, EK4, EM1)
- Type: Hydraulic
- 1st: 3.230
- 2nd: 2.105
- 3rd: 1.458
- 4th: 1.107
- 5th: 0.848
- R: 3.000
- FD: 4.400
See also
References
- ↑ Jason, Siu (2008). Honda B-series engines. 39966 grand ave North Branch MN,55056. p. 6. ISBN 978-1-932494-78-5.
- ↑ Super User. "JDM Spec Engines - Honda B-Series Engines". jdmspecengines.com.
- ↑ http://www.civictyper.org/ek9civic.html