Hydrocarbon plant

Euphorbia lathyris, which has been the subject of hydrocarbon plant research for many years.

Hydrocarbon plants are plants that follow certain metabolic pathways that produce hydrocarbon products similar to petroleum. These hydrocarbon products are called terpenoids. The plants that produce terpenoids in large enough quantities to be harvested can be as big as trees or as small as single-cell algae. The Euphorbiaceae family has been studied in detail by Dr. Melvin Calvin, Nobel Laureate, and discoverer of the Calvin Cycle. One particular tree, the Hevea tree, or more commonly known as the rubber tree, is probably the most famous hydrocarbon plant, supplying an estimated one third of the world’s rubber demand. It is still not as quick and cheap to make as petroleum-based rubber, hence why it does not occupy a larger portion of the market.[1] The Hevea tree naturally produces a latex substance which can tapped by cutting into the tree, and the latex can then be processed into rubber.

Most hydrocarbon plants are not trees, however, so this technique of tapping the tree is no longer feasible. Instead of tapping the tree, the hydrocarbons are extracted using various organic solvents. This process is especially useful with single-cell algae, such as Botryococcus braunii. This algae has two forms, both of which live in brackish water. The first form is a red algae that produces odd-numbered carbon chains roughly 25-31 atoms in length.[1] These carbon chains usually do not possess a large number of double bonds. The second type of Botryococcus braunii is green and produces even-numbered carbon chains that are between 34 and 38 carbons long, with many double bonds present. While the cause of this difference is not well-studied, the two different algae can be used for discrete purposes.

Dr. Calvin began his studies of hydrocarbon plants in 1977 by looking at yields of Euphorbia lathyris over two years. While his results were limited, due to growing season complications,[2] he did find there to be a substantial amount of hydrocarbon products. Once the plant samples were separated using adsorption chromatography and column chromatography, they were analyzed via mass spectrometry, IR spectroscopy, UV spectroscopy, and gas chromatography, 31-and-34-carbon-long alkane chains were found to be present in the hexane layer of the adsorption chromatography[2]

The PETRO project

The PETRO project is a program started in 2011 that has tried to address creating petroleum products using plants. The program is made of 10 projects that are all aiming to extract petroleum directly from plants without affecting the U.S. food supply. The goal of the program is to make more oil per acre than what we have now, and with less processing before it gets to the pump. This results in a process that is cleaner, uses less energy, and is more sustainable than the system we have in place presently.

The ten PETRO projects include:

  1. Harvesting the sugar from sorghum and processing it into farnesene, which is an additive in diesel fuels.[3]
  2. Designing carbon fixation pathways to produce pyruvic acid.[4]
  3. Manipulating the oil producing plant Camelina so that it is drought and cold resistant, making it possible to grow in harsh environments.[5]
  4. Making photosynthesis more effective by changing chemical pathways.[6]
  5. Turning sugarcane and sorghum into an oil-producing crop.[7]
  6. Engineering Camelina so that the topmost leaves reflect light onto the lower part of the plant, thereby increasing the overall efficiency of the plant.[8]
  7. Modifying Camelina so that it produces copious terpenes and modified oils.[9]
  8. Engineering tobacco so that it produces fuel molecules in ts leaves.[10]
  9. Increasing the turpentine harvest in pine trees.[11]
  10. Developing plants that produce vegetable oil in their leaves and stems as opposed to their seeds.[12]

All of these efforts are funded through the ARPA-E program available through the U.S. Department of Energy. The program, headed by Jonathan Burbaum, has received over $37,000,000 dollars of funding since its initial acceptance into the ARPA-E program.

See also

References

  1. 1 2
  2. 1 2 Calvin, Melvin, Esther K. Nementhy, and John W. Otvos. "HYDROCARBONS & ENERGY FROM PLANTS." (1978): n. pag. eScholarship. University of California, 20 June 2011. Web. 16 Apr. 2013.
  3. ↑ "Biofuels from sorghum". arpa-e.energy.gov. February 20, 1913. Archived from the original on October 20, 2013. Retrieved September 10, 2016.
  4. ↑ "Efficient CO2 fixation pathways". ara-e.energy.gov. 20 February 2013. Archived from the original on October 20, 2013. Retrieved September 11, 2016.
  5. ↑ "Enhanced carbon concentration in Camelina". arpa-e.energy.gov. Archived from the original on October 20, 2013. Retrieved September 11, 2016.
  6. ↑ "Fuel from tobacco and Arundo donax". arpa-e.energy.gov. Archived from the original on October 20, 2013. Retrieved September 10, 2016.
  7. ↑ "Genetically enhanced sorghum and sugarcane". arpa-e.energy.gov. Archived from the original on October 20, 2013. Retrieved September 10, 2016.
  8. ↑ "Improved light utilization in camelina". arpa-e.energy.gov. Archived from the original on October 20, 2013. Retrieved September 10, 2016.
  9. ↑ "Jet fuel from Camelina". arpa-e.energy.gov. Archived from the original on October 20, 2013. Retrieved September 10, 2016.
  10. ↑ "ARPA-E | Oil from Tobacco Leaves". Arpa-e.energy.gov. 2015-03-26. Retrieved 2016-09-04.
  11. ↑ "Tappable pine trees". arpa-e.energy.gov. Archived from the original on June 4, 2014. Retrieved September 10, 2016.
  12. ↑ "Vegetable oil form leaves and stems". arpa-e.energy.gov. Archived from the original on October 20, 2013. Retrieved 11 September 2016.
This article is issued from Wikipedia - version of the 9/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.