InstantGo

InstantGo (formerly Connected Standby)[1] is a Microsoft specification for Windows 8 hardware and software that aims to bring smartphone-type power management capabilities to the PC platform, as well as increasing physical security.

Description

The specification describes a Microsoft proprietary standard for Windows 8 software and hardware that developers and hardware vendors can optionally comply with to meet user requirements for devices being able to be turned on or off instantly. The mode also allows the operating system to continue performing background tasks, such as updating content from apps. Devices must be able to turn on in less than 500 milliseconds.[2] The hardware requirements extend to battery life, in that systems must not drain more than 5% of battery capacity while idle over a 16-hour period. [3]

It requires the following:

There are additional security-specific requirements, for example for memory to be soldered to the motherboard to prevent cold boot attack vectors that involve removing memory from the machine, as well as support for Secure Boot.

On Windows 8.1, supporting InstantGo and having a Trusted Platform Module (TPM) 2.0 chip will allow the device to use a passive device encryption system.[4][5]

Limitations

Systems that support this specification are incapable of booting legacy BIOS operating systems.[6] PCs with Connected Standby also cannot manually enter the Sleep and Hibernate power states.

See also

Footnotes

  1. ↑ Chin, Kevin A (19 June 2014). "InstantGo: a better way to sleep". Windows Experience Blog. Microsoft. Retrieved 6 July 2014.
  2. ↑ Intel-2013, p. 1.
  3. ↑ "Windows Hardware Certification Requirements: Client and Server Systems" (PDF). Microsoft.
  4. ↑ "Windows 8.1 includes seamless, automatic disk encryption—if your PC supports it". Ars Technica. Retrieved 18 October 2013.
  5. ↑ Thurrott, Paul (June 4, 2013). "In Blue: Device Encryption". Paul Thurrott's SuperSite for Windows. Penton Media. Retrieved June 10, 2013.
  6. ↑ "Windows Hardware Certification Requirements for Client and Server Systems". MSDN. Microsoft. 17 January 2014. System.Fundamentals.Firmware.CS.UEFISecureBoot.ConnectedStandby ... Platforms shall be UEFI Class Three (see UEFI Industry Group, Evaluating UEFI using Commercially Available Platforms and Solutions, version 0.3, for a definition) with no Compatibility Support Module installed or installable. BIOS emulation and legacy PC/AT boot must be disabled.

References


This article is issued from Wikipedia - version of the 10/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.