Javelin V6 STOL
| V6 STOL | |
|---|---|
| Role | Homebuilt aircraft |
| National origin | United States |
| Manufacturer | Javelin Aircraft |
| Status | Production completed |
| Number built | At least 25 |
| Unit cost |
US$89.00 (plans only, 1998) |
| Developed from | Piper PA-20 Pacer |
The Javelin V6 STOL is an American STOL homebuilt aircraft that was designed and produced by Javelin Aircraft of Wichita, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction.[1]
Design and development
The V6 STOL consists of plans to power an existing certified Piper PA-20 Pacer airframe with a Ford Motor Company V6 engine and moving it from the Certified Category to the Experimental Amateur-built category.[1]
The aircraft features a strut-braced high wing, a four-seat enclosed cabin accessed via doors, fixed conventional landing gear and a single engine in tractor configuration.[1]
Since it uses a standard Piper Pacer airframe, the aircraft is made from welded steel tubing, covered in doped aircraft fabric. Its 32.00 ft (9.8 m) span wing employs a USA 35B airfoil, mounts flaps and has a wing area of 168.00 sq ft (15.608 m2). The standard conversion installs a 230 hp (172 kW) Ford V6 powerplant, driving a fixed pitch propeller, although engines of up to 300 hp (224 kW) can be employed. The 230 hp (172 kW) engine gives the aircraft a sea level, standard day takeoff distance of 150 ft (46 m) and a landing distance of 300 ft (91 m).[1][2]
The V6 STOL has a typical empty weight of 1,200 lb (540 kg) and a gross weight of 2,200 lb (1,000 kg), giving a useful load of 1,000 lb (450 kg). With full fuel of 36 U.S. gallons (140 L; 30 imp gal) the payload for pilot, passengers and baggage is 784 lb (356 kg).[1]
The manufacturer estimates the time to complete the conversion from the supplied plans as 400 hours.[1]
Operational history
In January 2014, 14 examples were registered in the United States with the Federal Aviation Administration, but a total of 25 had been registered at one time.[3][4]
Specifications (V6 STOL)
Data from AeroCrafter and The Incomplete Guide to Airfoil Usage[1][2]
General characteristics
- Crew: one
- Capacity: three passengers
- Length: 22 ft 3 in (6.78 m)
- Wingspan: 32 ft 0 in (9.75 m)
- Wing area: 168.00 sq ft (15.608 m2)
- Airfoil: USA 35B
- Empty weight: 1,200 lb (544 kg)
- Gross weight: 2,200 lb (998 kg)
- Fuel capacity: 36 U.S. gallons (140 L; 30 imp gal)
- Powerplant: 1 × Ford Motor Company V6 six cylinder, liquid-cooled, four stroke automotive conversion engine, 230 hp (170 kW)
- Propellers: 2-bladed fixed pitch
Performance
- Maximum speed: 140 mph (225 km/h; 122 kn)
- Cruise speed: 130 mph (113 kn; 209 km/h)
- Stall speed: 52 mph (45 kn; 84 km/h)
- Range: 700 mi (608 nmi; 1,127 km)
- Service ceiling: 18,000 ft (5,486 m)
- Rate of climb: 1,800 ft/min (9.1 m/s)
- Wing loading: 13.1 lb/sq ft (64 kg/m2)
References
- 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 182. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
- 1 2 Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Retrieved 5 January 2014.
- ↑ Federal Aviation Administration (5 January 2014). "Make / Model Inquiry Results". Retrieved 5 January 2014.
- ↑ Federal Aviation Administration (5 January 2014). "N-Number Inquiry Results". Retrieved 5 January 2014.