Jeep Cherokee (SJ)

See also Jeep Cherokee for other models using this name
Jeep Cherokee (SJ)

Jeep Cherokee S
Overview
Manufacturer Jeep (American Motors)
Production 1974–1983
Assembly
Body and chassis
Class Full-size SUV
Body style 2-door wagon
4-door wagon
Platform SJ
Related Jeep Wagoneer (SJ)
Jeep Gladiator
Powertrain
Engine
  • 258 cu in (4.2 L) AMC I6
  • 360 cu in (5.9 L) AMC V8 2-barrel
  • 360 cu in (5.9 L) AMC V8 4-barrel
  • 401 cu in (6.6 L) AMC V8 4-barrel
Transmission
Dimensions
Wheelbase 108.7 in (2,761 mm)k
Length 186.4 in (4,735 mm)
Width 74.8 in (1,900 mm)
Height 66.4 in (1,687 mm)
Curb weight 4,514 lb (2,048 kg)
Chronology
Successor Jeep Cherokee (XJ)
Jeep Cherokee base 2-door
1974 Jeep Cherokee S
1983 Jeep Cherokee 2-door

The SJ series Jeep Cherokee is a full-size SUV that was produced from 1974 through 1983 by Jeep. It was based on the Wagoneer that was originally designed by Brooks Stevens in 1963.

Development

The Cherokee was a redesigned reintroduction of a two-door body style, with a single fixed rear side window with an optional flip-out section. Previously, a two-door version had been available in the Jeep Wagoneer line from 1963 to 1967), although this had the same pillar and window configuration as the four-door Wagoneer.

The Cherokee was marketed as the "sporty" two-door variant of Jeep's station wagon. The term "Sport Utility" appears for the first time in the 1974 Cherokee sales brochure.[2] A four-door was not added to the lineup until 1977. Other than the base model, the trim levels of the Cherokee included the S (Sport), Chief, Golden Eagle, Golden Hawk, Limited, Classic, Sport, Pioneer, and Laredo.

Performance

Engine choices consisted of AMC I6 or V8 powerplants. When it was equipped with the net 215 hp (160 kW; 218 PS) 401 cu in (6.6 L) AMC V8 engine, it would outrun other 4x4s in its class, and, with 3.07:1 highway gearing, could reach speeds in excess of 100 miles per hour (161 km/h) (early models had 120 mph speedometers). A range of AMC engines were offered: the 110 hp (82 kW; 112 PS) 258 cu in (4.2 L) inline six-cylinder, a 175 hp (130 kW; 177 PS) 360 cu in (5.9 L) V8 with two-barrel carburetor, a 195 hp (145 kW; 198 PS) four-barrel 360, the 401 cu in (6.6 L) V8, and even a Zeitgeist/Peugeot turbo diesel, albeit very rare. The durable 401 had a forged crankshaft and forged connecting rods, as well as the high nickel content block of the other AMC V8s. The 401 was discontinued at the end of 1978. After acquiring AMC in 1987, Chrysler kept the 360 cu in (5.9 L) V8 in production until 1991 for the Jeep Grand Wagoneer.

The SJ Cherokee - along with the Wagoneer and J-Truck - continues to hold the record for the largest engine ever offered in a Jeep, with the 401's displacement surpassing that of even the SRT-8 Grand Cherokee's 392 cu in (6.4 L) Hemi.

Mechanicals

A T-18/T-18a four-speed manual gearbox was standard for all years, while through 1979 the General Motors' Turbo-Hydramatic TH400, more commonly fitted to 3/4- and 1-ton trucks rather than SUVs, was optional. For comparison, the Chevy Blazer used the TH350 automatic. After 1979, the TH400 was replaced by the Chrysler's TorqueFlite 727.

A gear-driven Dana 20 transfer case with 2.03:1 low range was standard with the manual gearbox (which had a much lower first gear of 6.3:1), while the TH400 automatics received the permanent four-wheel-drive QuadraTrac system. The chain-driven, aluminum QuadraTrac was advanced at the time. It included a vacuum-operated center differential lock. The transfer case was offset, allowing it to sit just above the frame to avoid obstacles, and the chain itself is larger than nearly any other. A test by Petersen's Complete Book of Four-Wheel Drive reported that the Cherokee was the only vehicle unable to be dynoed because the transfer case would not allow the rear wheels to spin, unlike the other full-time four-wheel-drive vehicles being tested.[3] In the off-road test, the same held true. This transfer case was also employed successfully in Baja races, for example by Roger Mears in the Baja 1000. A 2.57:1 low range was optional on QuadraTrac.

In 1975, the Cherokee Chief package was introduced. Aside from trim changes, this model received larger fenders and wider axles, allowing larger tires to be fitted to further improve off-road ability. Four-door models were not available with "wide-track" axles. The Golden Eagle package was introduced in 1979. It was the same as the Chief but had denim interior upholstery, gold painted steel wheels and distinctive exterior trim that included a large gold eagle decal on the hood. In 1980 the high end Laredo package was introduced.

Dana 44 axles were used both in the front and the rear at least through 1979. Brake hardware was mostly General Motors equipment (sourced from the straight axle 1/2 ton 4x4 light duty truck and SUV line including the six lug rims), with disc brakes up front (optional on earlier models) and drum brakes in the rear.

All Cherokees had semi-elliptical leaf springs in the front and rear.

International markets

The Cherokee was marketed in left and right hand drive countries (such as the UK and Australia). Main production of the Cherokee was in Toledo, Ohio.

Australia

The SJ Cherokees were assembled in Brisbane, Australia from 1981. The initial units were fully built imports that needed to be partly disassembled for right-hand-drive. Later Jeep Australia began full assembly of the SUV and J20 trucks from knock-down kits.[1] Problems with spare parts, quality control, the limited capacity of the assembly plant (maximum of 60 Cherokee/J20 vehicles per month), and lack of dealer support (many were multi-franchise stores so Jeeps were not their focus) were disadvantages to maintaining market share.[1] Australian tariff regulations defined "real" 4x4 vehicles as having a separate frame and chassis construction and had a 25% duty and no quota restrictions, while vehicles with an integral chassis were classified as "cars" and subject to both an import quantity restriction and a 57.5% tax.[1] This meant the continuing assembly of the SJ models even after the compact XJ model was introduced by AMC. All Cherokee assembly was discontinued in Australia by 1985, three years after the SJ had been replaced in the U.S. by the XJ.

Argentina

In Argentina, the Cherokee was manufactured by Industrias Kaiser Argentina, who renamed the SUV as Jeep Gladiator, and was sold with one type of engine: the I6 Continental of the AMC, and was equipped with 3-speed manual transmission.

Awards

In February 1974, the Jeep Cherokee was the first vehicle to earn Four Wheeler Magazine's "Achievement Award" that later became the annual "Four Wheeler of the Year" recognition.[4]

See also

References

  1. 1 2 3 4 "Jeep in Australia 1978 - 1991". 4wd1.com. Retrieved 11 February 2016.
  2. Allen, Jim (2003). Jeep: Collector's Library. Motorbooks, MBI Publishing. p. 168. ISBN 978-0-7603-1486-9. Retrieved September 2013. Check date values in: |access-date= (help)
  3. Petersen's Complete Book of Four-Wheel Drive. Petersen Publishing. 1975. p. 98. ISBN 9780822700999.
  4. Perronne, Craig (June 2002). "40 Years Of Old Photos 4x4 Trucks & Desert Racing 1960s-1990s - A Stroll Through the Images of the Past". Four Wheeler Magazine. Archived from the original on 27 November 2010. Retrieved 11 February 2016.
Wikimedia Commons has media related to Jeep Cherokee (SJ).
This article is issued from Wikipedia - version of the 10/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.