Minerva-class frigate

Japanese drawing of the Phaeton
Class overview
Operators:  Royal Navy
Built: 17781782
Building: 17801828
Completed: 4
General characteristics
Type: Frigate
Tons burthen: 938 72/94
Length: 141 ft (43 m)
Beam: 38 ft 10 in (11.84 m)
Depth of hold: 13 ft 10 in (4.22 m)
Propulsion: Sail
Complement: 270 (raised to 280, 25 April 1780)
Armament:
  • UD: 28 × 18-pounder guns
  • QD: 8 × 6-pounder guns
  • FC: 2 × 6-pounder guns

The Minerva-class sailing frigates were a series of four ships built to a 1778 design by Sir Edward Hunt, which served in the Royal Navy during the latter decades of the eighteenth century.

During the early stages of the American Revolutionary War, the Royal Navy - while well supplied with ships from earlier programs, but faced with coastal operations and trade protection tasks along the American littoral - ordered numerous forty-four gun, two-decked ships and thirty-two gun 12-pounder armed frigates. Anticipating the entry of European powers into the war, and with renewed resistance provided by the large, nine hundred ton, thirty-two gun 12-pounder armed frigates of the French Navy, the RN looked to a newer larger design of frigate to meet this challenge. From November 1778 larger frigates with a heavier 18-pounder primary armament were ordered.

They were the first Royal Navy frigates designed to be armed with the eighteen-pounder cannon on their upper deck, the main gun deck of a frigate. Before coming into service, their designed secondary armament was augmented, with 9-pounder guns being substituted for the 6-pounder guns originally planned, and with ten 18-pounder carronades being added (six on the quarter deck and four on the forecastle). The type eventually proved successful, and went on to be virtually the standard frigate type during the latter periods of the age of sail.

Ships in class

References

This article is issued from Wikipedia - version of the 3/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.