Transformation matrix

In linear algebra, linear transformations can be represented by matrices. If T is a linear transformation mapping Rⁿ to R^m and ${\vec {x}}$ is a column vector with n entries, then

T( \vec x ) = \mathbf{A} \vec x

for some m×n matrix A, called the transformation matrix of T. There are alternative expressions of transformation matrices involving row vectors that are preferred by some authors.

Uses

Matrices allow arbitrary linear transformations to be represented in a consistent format, suitable for computation.^[1] This also allows transformations to be concatenated easily (by multiplying their matrices).

Linear transformations are not the only ones that can be represented by matrices. Some transformations that are non-linear on an n-dimensional Euclidean space Rⁿ can be represented as linear transformations on the n+1-dimensional space Rⁿ⁺¹. These include both affine transformations (such as translation) and projective transformations. For this reason, 4×4 transformation matrices are widely used in 3D computer graphics. These n+1-dimensional transformation matrices are called, depending on their application, affine transformation matrices, projective transformation matrices, or more generally non-linear transformation matrices. With respect to an n-dimensional matrix, an n+1-dimensional matrix can be described as an augmented matrix.

In the physical sciences, an active transformation is one which actually changes the physical position of a system, and makes sense even in the absence of a coordinate system whereas a passive transformation is a change in the coordinate description of the physical system (change of basis). The distinction between active and passive transformations is important. By default, by transformation, mathematicians usually mean active transformations, while physicists could mean either.

Put differently, a passive transformation refers to description of the same object as viewed from two different coordinate frames.

Finding the matrix of a transformation

If one has a linear transformation $T(x)$ in functional form, it is easy to determine the transformation matrix A by transforming each of the vectors of the standard basis by T, then inserting the result into the columns of a matrix. In other words,

\mathbf{A} = \begin{bmatrix} T( \vec e_1 ) & T( \vec e_2 ) & \cdots & T( \vec e_n ) \end{bmatrix}

For example, the function $T(x) = 5x$ is a linear transformation. Applying the above process (suppose that n = 2 in this case) reveals that

T( \vec{x} ) = 5 \vec{x} = 5 \mathbf{I} \vec{x} = \begin{bmatrix} 5 && 0 \\ 0 && 5 \end{bmatrix} \vec{x}

It must be noted that the matrix representation of vectors and operators depends on the chosen basis; a similar matrix will result from an alternate basis. Nevertheless, the method to find the components remains the same.

To elaborate, vector v can be represented in basis vectors, $E = [\vec e_1 \vec e_2 \ldots \vec e_n]$ with coordinates $[v]_E = [v_1 v_2 \ldots v_n]^T$ :

\vec v = v_1 \vec e_1 + v_2 \vec e_2 + \ldots + v_n \vec e_n = \sum v_i \vec e_i = E [v]_E

Now, express the result of the transformation matrix A upon ${\vec {v}}$ , in the given basis:

A(\vec v) = A(\sum {v_i \vec e_i}) = \sum {v_i A(\vec e_i)} = [A(\vec e_1) A(\vec e_2) \ldots A(\vec e_n)] [v]_E =

\;=\; A \cdot [v]_E = [\vec e_1 \vec e_2 \ldots \vec e_n] \begin{bmatrix} a_{1,1} & a_{1,2} & \ldots & a_{1,n} \\ a_{2,1} & a_{2,2} & \ldots & a_{2,n} \\ \vdots & \vdots & \ddots & \vdots \\ a_{n,1} & a_{n,2} & \ldots & a_{n,n} \\ \end{bmatrix} \begin{bmatrix} v_1 \\ v_2 \\ \vdots \\ v_n\end{bmatrix}

The $a_{i,j}$ elements of matrix A are determined for a given basis E by applying A to every $\vec e_j = [0 0 \ldots (v_j=1) \ldots 0]^T$ , and observing the response vector $A \vec e_j = a_{1,j} \vec e_1 + a_{2,j} \vec e_2 + \ldots + a_{n,j} \vec e_n = \sum a_{i,j} \vec e_i$ . This equation defines the wanted elements, $a_{i,j}$ , of j-th column of the matrix A.^[2]

Eigenbasis and diagonal matrix

Main articles: Diagonal matrix and Eigenvalues and eigenvectors

Yet, there is a special basis for an operator in which the components form a diagonal matrix and, thus, multiplication complexity reduces to n. Being diagonal means that all coefficients $a_{i,j}$ but $a_{i,i}$ are zeros leaving only one term in the sum $\sum a_{i,j} \vec e_i$ above. The surviving diagonal elements, $a_{i,i}$ , are known as eigenvalues and designated with $\lambda _{i}$ in the defining equation, which reduces to $A{\vec {e}}_{i}=\lambda _{i}{\vec {e}}_{i}$ . The resulting equation is known as eigenvalue equation.^[3] The eigenvectors and eigenvalues are derived from it via the characteristic polynomial.

With diagonalization, it is often possible to translate to and from eigenbases.

Examples in 2D computer graphics

Most common geometric transformations that keep the origin fixed are linear, including rotation, scaling, shearing, reflection, and orthogonal projection; if an affine transformation is not a pure translation it keeps some point fixed, and that point can be chosen as origin to make the transformation linear. In two dimensions, linear transformations can be represented using a 2×2 transformation matrix.

Stretching

A stretch in the xy-plane is a linear transformation which enlarges all distances in a particular direction by a constant factor but does not affect distances in the perpendicular direction. We only consider stretches along the x-axis and y-axis. A stretch along the x-axis has the form x' = kx; y' = y for some positive constant k. (Note that if k is greater than 1, then this really is a stretch, but if k is less than 1, it is really a compression along the x-axis, but we still call it a stretch. Also, if k=1, then this transformation is really the identity, i.e. it has no effect.) The matrix associated with a stretch by a factor k along the x-axis is given by

{\begin{bmatrix}k&0\\0&1\end{bmatrix}}

Similarly, a stretch by a factor k along the y-axis has the form x' = x; y' = ky, so the matrix associated with this transformation is

{\begin{bmatrix}1&0\\0&k\end{bmatrix}}

Rotation

For rotation by an angle θ clockwise about the origin the functional form is $x' = x \cos \theta + y \sin \theta$ and $y' = -x \sin \theta + y \cos \theta$ . Written in matrix form, this becomes:^[4]

\begin{bmatrix} x' \\ y' \end{bmatrix} = \begin{bmatrix} \cos \theta & \sin\theta \\ -\sin \theta & \cos \theta \end{bmatrix} \begin{bmatrix} x \\ y \end{bmatrix}

Similarly, for a rotation counter-clockwise about the origin, the functional form is $x' = x \cos \theta - y \sin \theta$ and $y' = x \sin \theta + y \cos \theta$ and the matrix form is:

\begin{bmatrix} x' \\ y' \end{bmatrix} = \begin{bmatrix} \cos \theta & - \sin\theta \\ \sin \theta & \cos \theta \end{bmatrix} \begin{bmatrix} x \\ y \end{bmatrix}

These formulae assume that the x axis points right and the y axis points up. In formats such as SVG where the y axis points down, these matrices must be swapped.

Shearing

For shear mapping (visually similar to slanting), there are two possibilities.

A shear parallel to the x axis has $x' = x + ky$ and $y' = y$ . Written in matrix form, this becomes:

\begin{bmatrix} x' \\ y' \end{bmatrix} = \begin{bmatrix} 1 & k \\ 0 & 1 \end{bmatrix} \begin{bmatrix} x \\ y \end{bmatrix}

A shear parallel to the y axis has $x' = x$ and $y' = y + kx$ , which has matrix form:

\begin{bmatrix} x' \\ y' \end{bmatrix} = \begin{bmatrix} 1 & 0 \\ k & 1 \end{bmatrix} \begin{bmatrix} x \\ y \end{bmatrix}

Reflection

Main article: Householder transformation

To reflect a vector about a line that goes through the origin, let $\scriptstyle \vec{l} = (l_x, l_y)$ be a vector in the direction of the line:

\mathbf{A} = \frac{1}{\lVert\vec{l}\rVert^2} \begin{bmatrix} l_x^2 - l_y^2 & 2 l_x l_y \\ 2 l_x l_y & l_y^2 - l_x^2 \end{bmatrix}

Orthogonal projection

To project a vector orthogonally onto a line that goes through the origin, let $\scriptstyle \vec{u} \,=\, (u_x, u_y)$ be a vector in the direction of the line. Then use the transformation matrix:

\mathbf{A} = \frac{1}{\lVert\vec{u}\rVert^2} \begin{bmatrix} u_x^2 & u_x u_y \\ u_x u_y & u_y^2 \end{bmatrix}

As with reflections, the orthogonal projection onto a line that does not pass through the origin is an affine, not linear, transformation.

Parallel projections are also linear transformations and can be represented simply by a matrix. However, perspective projections are not, and to represent these with a matrix, homogeneous coordinates can be used.

Examples in 3D computer graphics

Rotation

The matrix to rotate an angle θ about the axis defined by unit vector (l,m,n) is^[5]

\begin{bmatrix} ll(1-\cos \theta)+\cos\theta & ml(1-\cos\theta)-n\sin\theta & nl(1-\cos\theta)+m\sin\theta\\ lm(1-\cos\theta)+n\sin\theta & mm(1-\cos\theta)+\cos\theta & nm(1-\cos\theta)-l\sin\theta \\ ln(1-\cos\theta)-m\sin\theta & mn(1-\cos\theta)+l\sin\theta & nn(1-\cos\theta)+\cos\theta \end{bmatrix}.

Reflection

Main article: Householder transformation

To reflect a point through a plane $ax + by + cz = 0$ (which goes through the origin), one can use $\mathbf{A} = \mathbf{I}-2\mathbf{NN}^T$ , where $\mathbf {I}$ is the 3x3 identity matrix and $\mathbf {N}$ is the three-dimensional unit vector for the vector normal of the plane. If the L2 norm of $a, b,$ and $c$ is unity, the transformation matrix can be expressed as:

\mathbf{A} = \begin{bmatrix} 1 - 2 a^2 & - 2 a b & - 2 a c \\ - 2 a b & 1 - 2 b^2 & - 2 b c \\ - 2 a c & - 2 b c & 1 - 2c^2 \end{bmatrix}

Note that these are particular cases of a Householder reflection in two and three dimensions. A reflection about a line or plane that does not go through the origin is not a linear transformation — it is an affine transformation — as a 4x4 affine transformation matrix, it can be expressed as follows (assuming the normal is a unit vector):

{\begin{bmatrix}x'\\y'\\z'\\1\end{bmatrix}}={\begin{bmatrix}1-2a^{2}&-2ab&-2ac&-2ad\\-2ab&1-2b^{2}&-2bc&-2bd\\-2ac&-2bc&1-2c^{2}&-2cd\\0&0&0&1\end{bmatrix}}{\begin{bmatrix}x\\y\\z\\1\end{bmatrix}}

Where $d=\mathbf {p} \cdot \mathbf {N}$ for some point $\mathbf {p}$ on the plane.

If the 4th component of the vector is 0 instead of 1, then only the vector's direction is reflected and its length remains unchanged, as if it were mirrored through a parallel plane that passes through the origin. See homogenous coordinates and affine transformations below for further explanation.

Composing and inverting transformations

One of the main motivations for using matrices to represent linear transformations is that transformations can then be easily composed (combined) and inverted.

Composition is accomplished by matrix multiplication. If A and B are the matrices of two linear transformations, then the effect of applying first A and then B to a vector x is given by:

\mathbf{B}(\mathbf{A} \vec{x} ) = (\mathbf{BA}) \vec{x}

(This is called the associative property.) In other words, the matrix of the combined transformation A followed by B is simply the product of the individual matrices. Note that the multiplication is done in the opposite order from the English sentence: the matrix of "A followed by B" is BA, not AB.

A consequence of the ability to compose transformations by multiplying their matrices is that transformations can also be inverted by simply inverting their matrices. So, A⁻¹ represents the transformation that "undoes" A.

Other kinds of transformations

Affine transformations

Effect of applying various 2D affine transformation matrices on a unit square. Note that the reflection matrices are special cases of the scaling matrix.

Affine transformations on the 2D plane can be performed in three dimensions. Translation is done by shearing along over the z axis, and rotation is performed around the z axis.

To represent affine transformations with matrices, we can use homogeneous coordinates. This means representing a 2-vector (x, y) as a 3-vector (x, y, 1), and similarly for higher dimensions. Using this system, translation can be expressed with matrix multiplication. The functional form $x' = x + t_x; y' = y + t_y$ becomes:

\begin{bmatrix} x' \\ y' \\ 1 \end{bmatrix} = \begin{bmatrix} 1 & 0 & t_x \\ 0 & 1 & t_y \\ 0 & 0 & 1 \end{bmatrix} \begin{bmatrix} x \\ y \\ 1 \end{bmatrix}.

All ordinary linear transformations are included in the set of affine transformations, and can be described as a simplified form of affine transformations. Therefore, any linear transformation can also be represented by a general transformation matrix. The latter is obtained by expanding the corresponding linear transformation matrix by one row and column, filling the extra space with zeros except for the lower-right corner, which must be set to 1. For example, the counter-clockwise rotation matrix from above becomes:

{\begin{bmatrix}\cos \theta &-\sin \theta &0\\\sin \theta &\cos \theta &0\\0&0&1\end{bmatrix}}

Using transformation matrices containing homogeneous coordinates, translations can be seamlessly intermixed with all other types of transformations. The reason is that the real plane is mapped to the w = 1 plane in real projective space, and so translation in real Euclidean space can be represented as a shear in real projective space. Although a translation is a non-linear transformation in a 2-D or 3-D Euclidean space described by Cartesian coordinates, it becomes, in a 3-D or 4-D projective space described by homogeneous coordinates, a simple linear transformation (a shear).

More affine transformations can be obtained by composition of two or more affine transformations. For example, given a translation T' with vector $(t'_{x},t'_{y})$ , a rotation R by an angle θ counter-clockwise, a scaling S with factors $(s_{x},s_{y})$ and a translation T of vector $(t_{x},t_{y})$ , the result M of T'RST is:^[6]

{\begin{bmatrix}s_{x}\cos \theta &-s_{y}\sin \theta &t_{x}s_{x}\cos \theta -t_{y}s_{y}\sin \theta +t'_{x}\\s_{x}\sin \theta &s_{y}\cos \theta &t_{x}s_{x}\sin \theta +t_{y}s_{y}\cos \theta +t'_{y}\\0&0&1\end{bmatrix}}

When using affine transformations, the homogeneous component of a coordinate vector (normally called w) will never be altered. One can therefore safely assume that it is always 1 and ignore it. However, this is not true when using perspective projections.

Perspective projection

References

↑ Gentle, James E. (2007). "Matrix Transformations and Factorizations". Matrix Algebra: Theory, Computations, and Applications in Statistics. Springer. ISBN 9780387708737.
↑ Nearing, James (2010). "Chapter 7.3 Examples of Operators" (PDF). Mathematical Tools for Physics. ISBN 048648212X. Retrieved January 1, 2012.
↑ Nearing, James (2010). "Chapter 7.9: Eigenvalues and Eigenvectors" (PDF). Mathematical Tools for Physics. ISBN 048648212X. Retrieved January 1, 2012.
↑ http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-07-dynamics-fall-2009/lecture-notes/MIT16_07F09_Lec03.pdf
↑ Szymanski, John E. (1989). Basic Mathematics for Electronic Engineers:Models and Applications. Taylor & Francis. p. 154. ISBN 0278000681.
↑ 2D transformation matrices baking -

External links

The Matrix Page Practical examples in POV-Ray
Reference page - Rotation of axes
Linear Transformation Calculator
Transformation Applet - Generate matrices from 2D transformations and vice versa.
Coordinate transformation under rotation in 2D
Excel Fun - Build 3D graphics from a spreadsheet - Interactive transformation matrices in a live spreadsheet

Linear algebra

Basic concepts	Scalar Vector Vector space Scalar multiplication Vector projection Linear span Linear map Linear projection Linear independence Linear combination Basis Column space Row space Dual space Orthogonality Kernel Eigenvalues and eigenvectors Outer product Inner product space Dot product Transpose Gram–Schmidt process Linear equations

Vector algebra	Cross product Triple product Seven-dimensional cross product

Multilinear algebra	Geometric algebra Exterior algebra Bivector Multivector

Matrices	Block Decomposition Invertible Minor Multiplication Rank Transformation Cramer's rule Gaussian elimination

Numerical	Floating point Matrix Laboratory Numerical stability Basic Linear Algebra Subprograms (BLAS) Sparse matrix Comparison of linear algebra libraries Comparison of numerical analysis software

This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Transformation matrix

Uses

Finding the matrix of a transformation

Eigenbasis and diagonal matrix

Examples in 2D computer graphics

Stretching

Rotation

Shearing

Reflection

Orthogonal projection

Examples in 3D computer graphics

Rotation

Reflection

Composing and inverting transformations

Other kinds of transformations

Affine transformations

Perspective projection

See also

References

External links