BMW 003

BMW 003
BMW 003 engine at the Luftwaffenmuseum der Bundeswehr
Type Turbojet
Manufacturer BMW
First run August 1940
Major applications Heinkel He 162
Number built 500


The BMW 003 (full RLM designation BMW 109-003) was an early axial compressor turbojet engine produced by BMW AG in Germany during World War II. The 003 and the Junkers Jumo 004 were the only German turbojet engines to reach production during World War II.

Work had begun on the design of the BMW 003 before its contemporary, the Jumo 004, but prolonged developmental problems meant that the BMW 003 entered production much later, and the aircraft projects that had been designed with it in mind were re-engined with the Jumo powerplant instead. The most famous case of this was the Messerschmitt Me 262, which used the 003 in two of the V-series prototypes and in the two experimental A-1b aircraft. The only production aircraft to use the BMW 003 were the Heinkel He 162 and the later C-series, four-engined versions of the Arado Ar 234.

About 500 BMW 003 engines were built in Germany, but very few were ever installed in aircraft. The engine also formed the basis for turbojet development in Japan during the war, and in France and the Soviet Union following the war.

Design and development

The practicality of jet propulsion had been demonstrated in Germany in early 1937 by Hans von Ohain working with the Heinkel company. Recognising the potential of the invention, the Reich Air Ministry (German: Reichsluftfahrtministerium, abbreviated RLM) encouraged Germany's aero engine manufacturers to begin their own programmes of jet engine development, offering contracts to both Junkers and BMW for an engine capable of 690 kg (1,520 lb) static thrust.[1]

The BMW 003 began development as a project of the Brandenburgische Motorenwerke (Brandenburg Motor Works, known as "Bramo"), under the direction of Hermann Östrich and assigned the RLM designation 109-003 (using the RLM's "109-" prefix, common to all jet and rocket engine projects). Bramo was also developing another turbojet, the 109-002. In 1939, BMW bought out Bramo, and in the acquisition, obtained both engine projects. The 109-002 had a very sophisticated contra-rotating compressor design intended to eliminate torque, but was abandoned in favour of the simpler engine, which in the end proved to have enough development problems of its own.

Construction began late in the same year and the engine ran for the first time in August 1940,[2] but produced only 150 kg (330 lb) thrust, just half what was desired.[3] The first flight test took place in mid-1941, mounted underneath a Messerschmitt Bf 110. Problems continued, however, so delaying the program that while the Me 262 (the first aircraft intended to use the engine) was ready for flight-testing, there were no power plants available for it and it actually began flight tests with a conventional Junkers Jumo 210 piston engine in the nose. It was not until November 1941 that the Me 262 V1 was flown with BMW engines, which both failed during the test.[4] The prototype aircraft had to return to the airfield on the power of the piston engine, which was still fitted.

The general usage of the BMW powerplant was abandoned for the Me 262, except for two experimental examples of the plane known as the Me 262 A-1b. The Me 262A-1a production version used the competing Jumo 004 whose heavier weight required the wings to be swept back in order to move the center of gravity into the correct position. Work on the 003 continued anyway, and by late 1942 it had been made far more powerful and reliable. The improved engine was flight tested under a Junkers Ju 88 in October 1943 and was finally ready for mass production in August 1944. Completed engines earned a reputation for unreliability; the time between major overhauls (not technically a TBO) was about 50 hours.[5] (The competing Jumo 004's was between thirty and fifty, and may have been as low as ten.)[5]

Developments of the engine included the 003C, which raised thrust to 900 kg (2,000 lb), and the 003D, which raised it to 1,250 kg (2,760 lb), in addition to having eight compressor stages and two turbine stages.[6]

The only production aircraft to use the 003 were the Heinkel He 162, which fitted a modified "E" version of the engine, modified with ventral mounting points to allow it to be mounted atop the fuselage of an aircraft. The four-engined Arado Ar 234C variants were also designed to use the more available BMW jet engine.[7]

The BMW 003 proved cheaper in materials than the company's own 801 radial, RM12,000 to RM40,000, and cheaper than the Junkers Jumo 213 inverted V12 piston engine at RM35,000, but slightly more costly than the competing Junkers Jumo 004's RM10000.[8] Moreover, the 004 needed only 375 hours to complete (including manufacture, assembly, and shipping), compared to 1,400 for the 801.[9] At Kolbermoor, location of the Heinkel-Hirth engine works, the Fedden Mission, led by Sir Roy Fedden, found jet engine manufacturing was simpler and required lower-skill labor and less sophisticated tooling than piston engine production; in fact, most of making of hollow turbine blades and sheet metal work on jets could be done by tooling used in making automobile body panels.[10] The lifetime of the combustors was estimated at 200 hours.[5]

Preserved BMW 003 with Riedel flat-twin mechanical APU fitted

The BMW 003 utilized nearly the same starting method as its slightly more powerful Jumo 004 competitor: one of Norbert Riedel's 10 PS flat-twin two-stroke engines was installed within the engine's intake diverter as a mechanical APU to get the 003's central shaft rotating for operation — a post-war documented review of the BMW 003 engine's design stated that an electric starter of some sort was used to "turn-over" the Reidel flat twin two-stroke mechanical starting APU, with no existing photos of either wartime or restored BMW 003s showing the "D-shape" pull handle so prominent on many museum-preserved Jumo 004 jet engines' intake diverters.[11]

"Mixed-power" upgrade

One late version of the engine added a small rocket motor (the BMW 109-718) at the rear and usually just above the exhaust of the engine, which added some 1,250 kg (2,760 lb) thrust each for three to five minutes, for take off and short dashes.[12] In this configuration, it was known as the BMW 003R and was tested, albeit with some serious reliability problems, on single prototypes for advanced models of the Me 262 (the Me 262C-2b Heimatschützer II [Home Defender II]),[13] and He 162 (He 162E). Both prototypes flew under hybrid jet/rocket power during March 1945,[13] though records do not indicate the results of testing with the 162E.

Only about 500 examples of the BMW 003 were built,[8] but the Fedden Mission postwar estimated total German jet engine production by mid-1946 could have reached 100,000 units a year, or more.[5]

The 003 was intended for export to Japan, but working examples of the engine were never supplied. Instead, Japanese engineers used drawings and photos of the engine to design an indigenous turbojet, the Ishikawajima Ne-20.

Turboshaft development

The 003 was selected as the basis for a gas turbine development project for the German military's anticipated need for what is today called a turboshaft powerplant for multiple needs — this project was called the GT 101, using the 003 axial-flow turbojet as the starting point in mid-November 1944. Its original purpose would have been to re-engine the Panther tank with a turboshaft-based power system capable of up to a 1,150 PS usable shaft horsepower rating into an AFV's drivetrain, from an engine weight of only 450 kg (992 lb), giving it a 27 hp/ton power-to-weight ratio — just over twice the factor that the Panther's original gasoline-fueled Maybach V12 piston engine provided.[14]

Post-war use

Following the war, two captured 003s powered the prototype of the first Soviet jet, the Mikoyan-Gurevich MiG-9. Blueprints for BMW engines had been seized by Soviet forces from the Basdorf-Zühlsdorf plant near Berlin and from the Central Works near Nordhausen. Production of the 003 was set up at the "Red October" GAZ 466 (Gorkovsky Avtomobilny Zavod, or Gorky Automobile Plant) in Leningrad, where the engine was mass-produced from 1947 under the designation RD-20 (reactivnyi dvigatel, or "jet drive").[15]

After the Allied occupation of Germany, Marcel Dassault assisted Hermann Östrich in moving from the American Zone of occupied Germany into the French Zone. Within a couple of years, he was working for Voisin, a division of SNECMA, France's state-owned aircraft engine company. Using the basic design of the 003, he produced the larger Atar jet engine that powered Dassault's Ouragan, Dassault Mirage III and Mystère fighters.[16]

Variants

Data from:Aircraft Engines of the world 1946[17] and Design Analysis of BMW 003 Turbojet by Maj Rudolph C Schulte, Project Officer, Turbojet and Gus Turbine Developments, HQ, USAAF[18]

BMW 003A-1 (TL 109-003)
Prototype, 5.87 kN (1,320 lbf) / 8,000 rpm / sea level, weight of 609 kg (1,342 lb).
BMW 003A-2 (TL 109-003)
Initial production variant, 7.83 kN (1,760 lbf) / 9,500 rpm / sea level.
BMW 003C (TL 109-003)
Improved design, reduced weight A-2, 8.81 kN (1,980 lbf) / 9,500 rpm / sea level
BMW 003D (TL 109-003)
Improved design C, 10.76 kN (2,420 lbf) / 10,000 rpm / sea level, weight of 649 kg (1,430 lb).
BMW 003E 
With ventral mounting points for use on the Heinkel He 162 and Henschel Hs 132.
BMW 003R (TLR 109-003)
An A-2 subtype turbojet with a BMW 109-718 (RLM powerplant number 109-718) liquid-fuel rocket fixed permanently above the jet exhaust nozzle, running on R-stoff (a.k.a. Tonka or TONKA-250, 50% triethylamine and 50% xylidine) for fuel and SV-Stoff (aka RFNA: 94% HNO3, 6% N2O4) oxidizer, code-named Salbei (sage). The R delivered a combined thrust of 20.06 kN (4,510 lbf) for 3 minutes.

Applications

Specifications (BMW 003A-2)

Data from Aircraft Engines of the world 1946[17]

General characteristics

Components

Performance

See also

Related development
Comparable engines
Related lists

References

Notes
  1. ↑ Christopher, John. The Race for Hitler's X-Planes (The Mill, Gloucestershire: History Press, 2013), p.60.
  2. ↑ Gunston 1989, p.27.
  3. ↑ Christopher, p.60.
  4. ↑ Christopher, p.61.
  5. 1 2 3 4 Christopher, p.76.
  6. ↑ Christopher, p.73.
  7. ↑ Christopher, pp.73-4.
  8. 1 2 Christopher, p.74.
  9. ↑ Christopher, p.75.
  10. ↑ Christopher, pp.74-5.
  11. ↑ Schulte, Rudolph C. (1946). "Design Analysis of BMW 003 Turbojet - "Starting the Engine"". legendsintheirowntime.com. United States Army Air Force - Turbojet and Gus Turbine Developments, HQ, AAF. Retrieved September 3, 2016. Starting procedure is as follows: Starting engine is primed by closing electric primer switch, then ignition of turbojet and ignition and electric starting motor of Riedel engine are turned on (this engine can also be started manually by pulling a cable). After the Riedel unit has reached a speed of about 300 rpm, it automatically engages the compressor shaft of the turbojet. At about 800 rpm of the starting engine, starting fuel pump is turned on, and at 1,200 rpm the main (J-2) fuel is turned on. The starter engine is kept engaged until the turbojet attains 2,000 rpm, at which the starter engine and starting fuel are turned off, the turbojet rapidly accelerating to rated speed of 9,500 rpm on the J-2 fuel
  12. ↑ Christopher, p.124.
  13. 1 2 Christopher, p.125.
  14. ↑ Kay, Antony (2002). German Jet Engine and Gas Turbine Development 1930-1945. Shrewsbury, UK: Airlife Publishing. ISBN 9781840372946. Retrieved May 10, 2014.
  15. ↑ Albrecht, Ulrich (1994). The Soviet Armaments Industry. Routledge. ISBN 3-7186-5313-3.
  16. ↑ von Wogau, Karl (2004). The Path to European Defence. Maklu. ISBN 90-6215-923-0.
  17. 1 2 Wilkinson, Paul H. (1946). Aircraft Engines of the world 1946. London: Sir Isaac Pitman & Sons. pp. 300–301.
  18. ↑ Schulte, Rudolph C. (1946). "Design Analysis of BMW 003 Turbojet". legendsintheirowntime.com. United States Army Air Force - Turbojet and Gus Turbine Developments, HQ, AAF. Retrieved September 3, 2016.
Bibliography
  • Wilkinson, Paul H. (1946). Aircraft Engines of the world 1946. London: Sir Isaac Pitman & Sons. pp. 300–301. 
  • Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
  • Jane's Fighting Aircraft of World War II. London. Studio Editions Ltd, 1989. ISBN 0-517-67964-7
  • Kay, Antony, German Jet Engine and Gas Turbine Development 1930–1945, Airlife Publishing, 2002, ISBN 9781840372946

External links

Wikimedia Commons has media related to BMW 003.
This article is issued from Wikipedia - version of the 10/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.