Sulfuryl chloride

Sulfuryl chloride
Names
IUPAC name
Sulfuryl chloride
Other names
Sulfonyl chloride
Sulfuric chloride
Sulfur dichloride dioxide
Identifiers
7791-25-5 YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:29291 YesY
ChemSpider 23050 YesY
ECHA InfoCard 100.029.314
EC Number 232-245-6
PubChem 24648
Properties
SO2Cl2
Molar mass 134.9698 g mol−1
Appearance Colorless liquid with a pungent odor. Yellows upon standing.
Density 1.67 g cm−3 (20 °C)
Melting point −54.1 °C (−65.4 °F; 219.1 K)
Boiling point 69.4 °C (156.9 °F; 342.5 K)
hydrolyzes
Solubility miscible with benzene, toluene, chloroform, CCl4, glacial acetic acid
1.4437 (20 °C) [1]
Hazards
Corrosive (C)
R-phrases R14, R34, R37
S-phrases (S1/2), S26, S30, S45
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g., phosphorus Special hazard W: Reacts with water in an unusual or dangerous manner. E.g., cesium, sodiumNFPA 704 four-colored diamond
0
3
2
Flash point Not flammable
Related compounds
Related sulfuryl halides
Sulfuryl fluoride
Related compounds
Thionyl chloride
Chlorosulfonic acid
Sulfuric acid
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Sulfuryl chloride is an inorganic compound with the formula SO2Cl2. At room temperature, it is a colorless liquid with a pungent odor. Sulfuryl chloride is not found in nature, as can be inferred from its rapid hydrolysis.

Sulfuryl chloride is commonly confused with thionyl chloride, SOCl2. The properties of these two sulfur oxychlorides are quite different: sulfuryl chloride is a source of chlorine whereas thionyl chloride is a source of chloride ions. An alternative IUPAC name is sulfuroyl dichloride.

Structure

Sulfur is tetrahedral in SO2Cl2, being bound to two oxygen atoms via polarized double bonds (whichorbitals[2]) and to two chlorine atoms via polarized single bonds. The oxidation state of the sulfur atom is +6, as in H2SO4.

Synthesis

SO2Cl2 is prepared by the reaction of sulfur dioxide and chlorine in the presence of a catalyst, such as activated carbon.

SO2 + Cl2 → SO2Cl2

The crude product can be purified by fractional distillation. It is uncommon to prepare SO2Cl2 in the laboratory because it is commercially available. Sulfuryl chloride can also be considered a derivative of sulfuric acid.[3]

Sulfuryl chloride was first prepared in 1838 by the French chemist Henri Victor Regnault.[4]

Reactions

Sulfuryl chloride reacts with water, releasing hydrogen chloride gas and sulfuric acid:

2 H2O + SO2Cl2 → 2 HCl + H2SO4

SO2Cl2 will also decompose when heated to or above 100 °C, about 30 °C above its boiling point.

Upon standing, SO2Cl2 decomposes to sulfur dioxide and chlorine, which gives the older samples a slightly yellowish color.

Uses

Sulfuryl chloride is often used as a source of Cl2. Because it is a pourable liquid, it is considered more convenient than Cl2 to measure, store, and dispense. SO2Cl2 is widely used as a reagent in the conversion of C-H → C-Cl adjacent to activating substituents such as carbonyls and sulfoxides. It also chlorinates alkanes, alkenes, alkynes, aromatics, ethers (such as tetrahydrofuran) and epoxides. Such reactions occur under free radical conditions using an initiator such as AIBN. It can also be used to convert thiols or disulfides into their corresponding sulfenyl chlorides. SO2Cl2 can also convert alcohols to alkyl chlorides. In industry, sulfuryl chloride is most used in producing pesticides.

SO2Cl2 can also be used to treat wool to prevent shrinking.

Precautions

SO2Cl2 is toxic, corrosive, and acts as a lachrymator. It can form fuming mixtures with water, as well as donor solvents such as DMSO and DMF.

References

  1. Patnaik, P. (2002). Handbook of Inorganic Chemicals. McGraw-Hill. ISBN 0-07-049439-8.
  2. Cunningham, T. P.; Cooper, D. L.; Gerratt, J.; Karadakov, P. B.; Raimondi, M. (1997). "Chemical bonding in oxofluorides of hypercoordinatesulfur". Journal of the Chemical Society, Faraday Transactions. 93 (13): 2247–2254. doi:10.1039/A700708F.
  3. Hogan, C. M. (2011). "Sulfur". In Jorgensen, A.; Cleveland, C. J. Encyclopedia of Earth. Washington DC: National Council for Science and the Environment.
  4. See:

Further reading

This article is issued from Wikipedia - version of the 10/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.