Superphane

Superphane
Identifiers
60144-50-5 YesY
3D model (Jmol) Interactive image
ChemSpider 126757 YesY
PubChem 143678
Properties
C24H24
Molar mass 312.46 g·mol−1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

[2.2.2.2.2.2]( 1,2,3,4,5,6)Cyclophane or superphane is a 6-fold bridged cyclophane with all arene positions in the benzene dimer taken up by ethylene spacers. The compound has been of some scientific interest as a model for testing aromaticity and was first synthesised by Boekelheide in 1979.[1][2] Superphane is the base compound for a large group of derivatives with structural variations. The analogs with 2 to 5 bridges are also known compounds. The benzene rings have been replaced by other aromatic units, such as those based on ferrocene or stabilized cyclobutadiene. Numerous derivatives are known with variations in the type and length of the bridging units.

Synthesis

The first synthesis of superphane itself by Boekelheide involved forming pairs of bridging units. At each stage, two o-chloromethyl toluene structures are pyrolyzed to form o-xylylenes, either directly or via benzocyclobutene intermediates. Upon further pyrolysis, these each undergo electrocyclic ring-opening to form o-xylylenes. These structures were not isolated—they immediately react via [4+4] cycloaddition reactions to form two adjacent bridges between the aromatic rings.

The process started from 2,4,5-trimethylbenzyl chloride 1, which was pyrolyzed at 700 °C to give benzocyclobutene 2 and further pyrolyzed to the cyclooctane dimer 3. Rieche formylation afforded 4 (after separation from other regioisomers), aldehyde reduction using sodium borohydride gave diol 5, and then chlorination using thionyl chloride) gave dichloride 6. Another pyrolysis gave tetrabridged cyclophane 7, another formylation reaction gave dialdehyde 8, another reduction/chlorination sequence gave dichloride 9, and a final pyrolysis gave superphane 10 as hard white crystals with melting point 325–327 °C.

Other synthetic routes were published by Hopf (1983)[3] and another by Boekelheide (1984).[4]

Structure and properties

X-ray analysis shows D6h molecular symmetry with the aromatic planes separated by 262 pm. The sp2-sp3 carbon carbon bonds are out of planarity with the benzene rings by 20°. The strain energy is estimated at 20 kcal/mole. Proton NMR shows just one peak at 2,98 ppm and carbon NMR two at 32 ppm and 144 ppm.[5]

References

  1. Schirch, Paulo F. T.; Boekelheide, Virgil (1979). "[2.2.2.2.2](1,2,3,4,5)Cyclophane". Journal of the American Chemical Society. 101: 3125–3126. doi:10.1021/ja00505a052.
  2. Sekine, Y.; Brown, M.; Boekelheide, V. (1979). "[2.2.2.2.2.2](1,2,3,4,5,6)Cyclophane: superphane". Journal of the American Chemical Society. 101: 3126–3127. doi:10.1021/ja00505a053.
  3. El-Tamany, Sayed; Hopf, Henning (1983). "Eine zweite Synthese von [26](1,2,3,4,5,6)Cyclophan (Superphan)". Chemische Berichte. 116: 1682–1685. doi:10.1002/cber.19831160444.
  4. Rohrbach, William D.; Sheley, Robert; Boekelheide, V. (1984). "Methylated multibridged [2n]cyclophanes. All alternate synthesis of [26](1,2,3,4,5,6) cyclophane (superphane)". Tetrahedron. 40: 4823–4828. doi:10.1016/S0040-4020(01)91315-8.
  5. Sekine, Yasuo; Boekelheide, V. (1981). "A study of the synthesis and properties of [26](1,2,3,4,5,6)cyclophane (superphane)". Journal of the American Chemical Society. 103: 1777–1785. doi:10.1021/ja00397a032.
This article is issued from Wikipedia - version of the 6/24/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.