Type 14 10 cm Cannon

Type 14 10 cm Cannon

Type 14 10 cm Cannon
Type Field gun
Place of origin  Empire of Japan
Service history
In service 1925-1945
Used by Imperial Japanese Army
Wars World War II
Production history
Designer Osaka Arsenal
Produced 1925-?
Number built 64
Specifications
Weight 1,500 kilograms (3,300 lb) Firing
1,979 kg (4,363 lb) Traveling
Length 4.72 m (15 ft 6 in) Firing
8.94 m (29 ft 4 in) Traveling
Barrel length 3.556 metres (11 ft 8 in) L/34.2
Width 1.57 m (5 ft 2 in) Track
1.84 m (6 ft 0 in) Maximum
Height 1.73 m (5 ft 8 in)
Shell 15.77 kilograms (34 lb 12 oz)
Caliber 105 mm (4.13 in)
Breech interrupted screw
Recoil hydropneumatic
Carriage split trail
Elevation -5° to +33°
Traverse 15° right, 15° left
Rate of fire 6-8 rounds/minute
Muzzle velocity 620 m/s (2,034 ft/s)
Maximum firing range 13,265 metres (14,507 yd)
Sights Panoramic

The Type 14 10 cm Cannon (十四式十糎加農砲 Jyūyon-shiki Kanōhō) was the first medium caliber cannon totally of Japanese design and the first with a split trail carriage. The Type 14 designation was given to this gun as it was accepted in the 14th year of Emperor Taishō's reign (1925).[1] It was used Imperial Japanese Army but was not considered successful and was replaced by the Type 92 10 cm Cannon.

History and development

In the Military Museum of the Chinese People's Revolution, Beijing

Following reports based on first-hand observation of European artillery tactics in World War I by Japanese military observers, the Imperial Japanese Army General Staff instructed the Army Technical Bureau to begin work on new designs to modernize Japan's largely antiquated artillery. One priority was the development of a medium caliber artillery piece that would be able to provide greater firepower than the standard 75mm artillery currently in front line service. However, Japan lacked much of the technical expertise or industrial infrastructure to develop such as weapon, and initial prototypes issued as the "Type 7 10cm cannon" and the "Type 12 10cm cannon" were rejected as unsatisfactory.

However, with the incorporation of advancement in design taken from contemporary Schneider designs, the Type 14 10 cm Cannon was finally accepted into service in 1925. However, due to technical and budgetary issues, only a total of 64 units were produced.[2]

Design

The Type 14 10 cm Cannon was similar in design to the earlier Type 38 10 cm Cannon, which was in turn based on a 1905 Krupp design, but is notable in that it was the first design done independently in Japan. It had an interrupted screw breechblock, a hydropneumatic recoil mechanism, heavy wooden wheels, and a split trail.[3]

Ammunition was semifixed, with High-explosive, armor-piercing warhead, shrapnel, and gas shells, and time fuzes for smoke and incendiary projectiles.[4]

It was designed to be transportable by a team of eight draft horses. However, in 1931, a tractor was designed for use with the Type 14, with a 50 horsepower diesel engine, which greatly increased its transportability, albeit at a top speed of 8 miles per hour.

Combat record

The Type 14 10 cm Cannon proved disappointing in terms of range and accuracy, and was not regarded as a successful design. The units which were completed with assigned to reserve and training units in the Japanese home islands, and were not deployed overseas in World War II.

References

Notes

  1. ↑ War Department Special Series No 25 Japanese Field Artillery October 1944
  2. ↑ Type 14 on Taki's Imperial Japanese Army page
  3. ↑ US Department of War, TM 30-480, Handbook on Japanese Military Forces
  4. ↑ US Department of War, TM 30-480, Handbook on Japanese Military Forces

Bibliography

This article is issued from Wikipedia - version of the 3/9/2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.