Water filling algorithm

Water filling algorithm is a general name given to the ideas in communication systems design and practice for equalisation strategies on communications channels. As the name suggests, just as water finds its level even when filled in one part of a vessel with multiple openings, as a consequence of Pascal's law, the amplifier systems in communications network repeaters, or receivers amplify each channel up to the required power level compensating for the channel impairments. See, for example, channel power allocation in MIMO systems.

Single channel systems

In a single channel communication system the deamplification and loss present on them can be simplistically taken as attenuation by a percentage g, then amplifiers restore the signal power level to the same value at transmission setup by operating at a gain of 1/ (1-g). E.g. if we experience 6dB attenuation in transmission, i.e. 75% loss, then we have to amplify the signal by a factor of 4x to restore the signal to the transmitter levels.

Multichannel systems

Same ideas can be carried out in presence impairments and a multiple channel system. Amplifier nonlinearity, crosstalk and power budgets prevent the use of these waterfilling algorithms to restore all channels, and only a subset can benefit from them.

See also

  1. Water-pouring algorithm
  2. Zero forcing equalizer
  3. Robert Lucky
  4. Amplifier systems
  5. EDFA

References

  1. Proakis, Digital Communication Systems, 4th Ed., McGraw Hill, (2001).


This article is issued from Wikipedia - version of the 11/11/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.