Character Generator Protocol

Not to be confused with character generator.

The Character Generator Protocol (CHARGEN) is a service of the Internet Protocol Suite defined in RFC 864 in 1983 by Jon Postel. It is intended for testing, debugging, and measurement purposes. The protocol is rarely used, as its design flaws allow ready misuse.

A host may connect to a server that supports the Character Generator Protocol on either Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) port number 19. Upon opening a TCP connection, the server starts sending arbitrary characters to the connecting host and continues until the host closes the connection. In the UDP implementation of the protocol, the server sends a UDP datagram containing a random number (between 0 and 512) of characters every time it receives a datagram from the connecting host. Any data received by the server is discarded.

Inetd implementation

On most UNIX-like operating systems, a CHARGEN server is built into the inetd or xinetd daemon. The CHARGEN service is usually not enabled by default. It may be enabled by adding the following lines to the file /etc/inetd.conf and telling inetd to reload its configuration:

chargen   stream  tcp     nowait  root    internal
chargen   dgram   udp     wait    root    internal

Applications

The CHARGEN service may be used as a source of a byte-stream for debugging TCP network code for proper bounds checking and buffer management. It may also be a source of generic payload for bandwidth measurement and/or QoS fine-tuning. Although consideration must be given if hardware compression is active, as the output from the CHARGEN service is easily and efficiently compressed. This compression can cause bandwidth tests to report the size of the data after decompression, instead of the actual amount of data which passed the wire.

Sample session

A typical CHARGEN service session looks like this: The user connects to the host using a telnet client. The user receives a stream of bytes. Although the specific format of the output is not prescribed by RFC 864, the recommended pattern (and a de facto standard) is shifted lines of 72 ASCII characters repeating.

$ telnet localhost chargen
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh
"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi
#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij
$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk
%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl
&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm
'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn
()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno
)*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop
*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq
+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr
,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs
-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst
./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu
/0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv
^]
telnet> quit
Connection closed.

This continues until the TCP connection is closed as shown in the trace by ending the telnet session.

Abuse

The service was used maliciously to crash MS DNS servers running Microsoft Windows NT 4.0 by piping the arbitrary characters straight into the DNS server listening port (telnet ntbox 19 | telnet ntbox 53).[1] However, the attack was presumably a symptom of improper buffer management on the part of Microsoft's DNS service and not directly related to the CHARGEN service.

UDP CHARGEN is commonly used in denial of service attacks. By using a fake source address the attacker can send bounce traffic off a UDP CHARGEN application to the victim. UDP CHARGEN sends 200 to 1,000 times more data than it receives, depending upon the implementation. This "traffic multiplication" is also attractive to an attacker because it obscures the attacker's IP address from the victim.

CHARGEN was widely implemented on network-connected printers. As printer firmware was rarely updated on older models before CHARGEN and other security concerns were known, there may still be many network-connected printers which implement the protocol. Where these are visible to the Internet, they are invariably misused as denial of service vectors. Potential attackers often scan networks looking for UDP port 19 CHARGEN sources.

So notorious is the availability of CHARGEN in printers that some distributed denial of service trojans now use UDP port 19 for their attack traffic. The supposed aim is to throw investigators off the track; to have them looking for old printers rather than subverted computers.

See also

References

  1. ↑ "Access Violation in Dns.exe Caused by Malicious Telnet Attack". Support.microsoft.com. 2006-11-01. Retrieved 2009-05-31.
This article is issued from Wikipedia - version of the 3/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.