Prussian G 3

Prussian G 3
DRG Class 53.70–71
Number(s) DRG 53 7001–7157
Quantity 2,068
Year(s) of manufacture 1877–1896
Wheel arrangement 0-6-0
Axle arrangement C n2
Gauge 1,435 mm (4 ft 8 12 in) standard gauge
Length over buffers 15,176 mm (49 ft 9.5 in)
Service weight 38.0 t (37.4 long tons; 41.9 short tons)
Adhesive weight 38.0 t (37.4 long tons; 41.9 short tons)
Axle load 12.66 t (12.46 long tons; 13.96 short tons)
Top speed 45 km/h (28 mph)
Driving wheel diameter 1,330 mm (52.36 in)
No. of cylinders 2
Cylinder bore 450 mm (17.72 in)
Piston stroke 630 mm (24.80 in)
Boiler Overpressure 10 bar (1,000 kPa; 150 psi)
Grate area 1.53 m2 (16.5 sq ft)
Evaporative heating area 124.8 m2 (1,343 sq ft)
Tender 3 T 10.5

In 1905 the Prussian state railways grouped six-coupled, medium-powered, goods train, tank locomotives into its Class G 3. In addition to standard locomotives, there were also 285 G 3s that were not built to German state railway norms, because they had been built, in most cases, before the foundation of the Prussian state railways.

The G 3 standard locomotives were, in their day the standard goods train locomotives with the Prussian state railways. The first examples were procured in 1877 for the Berlin-Wetzlar railway, known as the Kanonenbahn ('Cannons' line). Other deliveries went to the various state and private Prussian railways, to the Prussian state railways themselves and the Royal Prussian Military Railway. Some of the locomotives had outside valve gear, the majority however had inner gear. The railway division of Frankfurt am Main even classified locomotives with outside valve gear as the G 2. In all some 2,068 G3 locomotives were built.

The G 3 differed from the Prussian G 4.1 in having a lower boiler overpressure of 10 bar (1,000 kPa; 150 psi) as against 12 bar (1,200 kPa; 170 psi) on the G 4.1. From 1886 onwards, only the variant with the higher boiler pressure was built. Several locomotives were later given boilers with the higher boiler pressure and were then classified as G 4.1. One G 3 ended up in the Royal Saxon State Railways on the division of the Berlin-Dresden railway and was designated as a Saxon V with the name Tellkoppe.

In 1923 the Deutsche Reichsbahn envisaged as many as 523 locomotives in its renumbering plan, with the numbers 53 7001 - 7522 and 53 8294 (from Saxony). However, by 1925 only locomotives with the numbers 53 7001 - 7157 were included. They were retired by 1930.

In the Second World War two G 3s came into the Reichsbahn fleet from Poland as numbers 53 7005 and 7006.

Other railway companies also owned Class G 3 engines:

Class G3 locomotives were equipped with a Prussian pr 3 T 10.5 tender.

One Prussian Class G 3, the Cöln 1100, later Saarbrücken 3143 has been preserved for posterity by the DB Museum in Nuremberg. It had been rebuilt from a Prüfgewicht.

See also

Literature

This article is issued from Wikipedia - version of the 7/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.